Brokentone Posted October 21, 2022 Report Share Posted October 21, 2022 ‘8I have used Trex deck boards for outdoor signs. Pros are after it is cut it is done (no finish required), stays like new indefinitely, there is no fine dust when cutting, blade life is pretty good I guess because of the oil in the material. Cons are it is heavy, need to tape backside (this is recycled material and I found something’s that can scratch table), cuts slow I use the lowest speed on my hawk, if you cut fast it will weld back together, I just found out today that shelf liner does not stick well enough use blue tape. The last pieces I bought were about 53. for a 16’ 1x6 solid edge. Bob jollyred, WayneMahler, OCtoolguy and 5 others 6 2 Quote Link to comment Share on other sites More sharing options...
barb.j.enders Posted October 22, 2022 Report Share Posted October 22, 2022 Thanks for the info. Your project looks good. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted October 22, 2022 Report Share Posted October 22, 2022 very nice job OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted October 22, 2022 Report Share Posted October 22, 2022 I've often wondered about this.. Thanks for posting all the info about it.. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Brokentone Posted October 23, 2022 Author Report Share Posted October 23, 2022 I don’t use it often, yesterday I decided to make an intersecting word sign, as soon as I started cutting I new it was not going to go well because the pattern started lifting immediately. I had used shelf liner for the first time on this material, lesson learned. Here is the result, still need to do the ends not decided on design. Tanks for the kind words Bob OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted October 23, 2022 Report Share Posted October 23, 2022 1 hour ago, Brokentone said: I don’t use it often, yesterday I decided to make an intersecting word sign, as soon as I started cutting I new it was not going to go well because the pattern started lifting immediately. I had used shelf liner for the first time on this material, lesson learned. Here is the result, still need to do the ends not decided on design. Tanks for the kind words Bob Very job of cutting. Thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.