Popular Post courtym74 Posted November 27, 2022 Popular Post Report Share Posted November 27, 2022 Customer asked for a big tree of life pattern. Found this one as a black and white free image. Liked it so much she ordered four of them! 22 inches wide. 1/2 inch birch ply. #5 reverse tooth Jim McDonald, Woodrush, RabidAlien and 18 others 21 Quote Link to comment Share on other sites More sharing options...
Charlie E Posted November 28, 2022 Report Share Posted November 28, 2022 Big piece to turn around on those cuts near the edge, isn't it? Nice job! OCtoolguy and courtym74 2 Quote Link to comment Share on other sites More sharing options...
Dak0ta52 Posted November 28, 2022 Report Share Posted November 28, 2022 Great job, Matt. I was thinking the same thing as Charlie. My saw is only 16-inches so I would have to cut something that large with spirals. courtym74 and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
hotshot Posted November 28, 2022 Report Share Posted November 28, 2022 (edited) Can you post a link to that image that was based on please? Edited November 28, 2022 by hotshot OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted November 28, 2022 Report Share Posted November 28, 2022 awesome job courtym74 and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
barb.j.enders Posted November 28, 2022 Report Share Posted November 28, 2022 9 hours ago, Dak0ta52 said: Great job, Matt. I was thinking the same thing as Charlie. My saw is only 16-inches so I would have to cut something that large with spirals. Wouldn't necessarily need spirals, but it would make for some interesting cutting. OCtoolguy, courtym74 and Dak0ta52 2 1 Quote Link to comment Share on other sites More sharing options...
Blaughn Posted November 29, 2022 Report Share Posted November 29, 2022 My arthritic hand ache just looking at that! Nice job! Bruce courtym74 and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
wombatie Posted November 30, 2022 Report Share Posted November 30, 2022 A lovely piece of work, well done. Marg courtym74 and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted November 30, 2022 Report Share Posted November 30, 2022 Great job on this one. Easy to see why you received the extra orders from it Dick heppnerguy courtym74 and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
courtym74 Posted December 1, 2022 Author Report Share Posted December 1, 2022 On 11/27/2022 at 10:56 PM, hotshot said: Can you post a link to that image that was based on please? I don't remember the link, but here's the image itself. Gene Howe, OCtoolguy and heppnerguy 1 2 Quote Link to comment Share on other sites More sharing options...
hotshot Posted December 1, 2022 Report Share Posted December 1, 2022 (edited) Awesome, I might see if it is cuttable when I shrink it down to Kennedy coin size. I have another tree of life pattern I do, but it's a bit more involved, so this might be a good alternative. I attached the one I've been doing, cut on a kennedy. As you can see, it's a little nasty, even blown up. If you were to see that at actual size, the twigs are pin size. Edited December 1, 2022 by hotshot heppnerguy, Dave Monk, Jim McDonald and 2 others 5 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted December 1, 2022 Report Share Posted December 1, 2022 (edited) 38 minutes ago, hotshot said: Awesome, I might see if it is cuttable when I shrink it down to Kennedy coin size. I have another tree of life pattern I do, but it's a bit more involved, so this might be a good alternative. I attached the one I've been doing, cut on a kennedy. As you can see, it's a little nasty, even blown up. If you were to see that at actual size, the twigs are pin size. When I posted your request, I was hoping you were thinking of a coin cut! I really miss seeing you coin art. Hope you get back to sharing it with us. Edited December 1, 2022 by Scrappile hotshot 1 Quote Link to comment Share on other sites More sharing options...
hotshot Posted December 2, 2022 Report Share Posted December 2, 2022 (edited) 11 hours ago, Scrappile said: When I posted your request, I was hoping you were thinking of a coin cut! I really miss seeing you coin art. Hope you get back to sharing it with us. I hope to get some saw time shortly, and will post this new design if it is cuttable. A lot of the time, I wont really know if it can be cut until I print it to size, and get it on the saw and see it under magnification. There is always the Eisenhower if I need a little more re-estate Edited December 2, 2022 by hotshot Gene Howe 1 Quote Link to comment Share on other sites More sharing options...
courtym74 Posted December 6, 2022 Author Report Share Posted December 6, 2022 On 11/27/2022 at 10:17 PM, Dak0ta52 said: Great job, Matt. I was thinking the same thing as Charlie. My saw is only 16-inches so I would have to cut something that large with spirals. Rodney, I basically would cut from an outside corner, where the leaf tip met the rim, down until the leaf meets stem then back up and cut the rim to the other leaf tip then go from there. Kept me from making that turn that put the piece against the back of the saw. Dak0ta52 1 Quote Link to comment Share on other sites More sharing options...
rdatelle Posted December 6, 2022 Report Share Posted December 6, 2022 Nice cutting on all of them. I have a 20 Pegus and that would be tricky. Quote Link to comment Share on other sites More sharing options...
Scrappile Posted December 6, 2022 Report Share Posted December 6, 2022 Not hard to down size the pattern some. Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.