Popular Post FrankEV Posted December 12, 2022 Popular Post Report Share Posted December 12, 2022 Steve Good recently issued a pattern for a Heart Tray. I had some Maple and Padauk boards left over from the Heart Box I made back last February (https://www.scrollsawvillage.com/forums/topic/45466-my-version-of-dave-monk%E2%80%99s-%E2%80%98box-for-valentines-day%E2%80%99/#comment-486165). I thought the Tray would make a good companion for the Box I gave my Lady. Was going to give it to her on Christmas but she saw and claimed it already. Laminated the Maple and Padauk making the tray walls 1 1/4” high. Stack cut the outside of laminated tray walls along with the 1/8” thick maple bottom first, then after removing the bottom, cut out the interior sections. Fairly easy cutting with Pegas #5 Skip tooth Blade. Lot of hand sanding creating the red dust everywhere. Attached bottom to walls with Superglue and applied multiple coats of Deft Clear Gloss Lacquer. Used the inside dropouts to trace and cut out the red felt bottom liner which I attached with spray adhesive. PITA to fit the sticky liner in its proper place. Comments and Critiques always welcome Charlie E, barb.j.enders, frankorona and 13 others 16 Quote Link to comment Share on other sites More sharing options...
Blaughn Posted December 12, 2022 Report Share Posted December 12, 2022 Nice Job. I'll bet that was a bear to sand before Finishing!!! Bruce Quote Link to comment Share on other sites More sharing options...
FrankEV Posted December 12, 2022 Author Report Share Posted December 12, 2022 33 minutes ago, Blaughn said: Nice Job. I'll bet that was a bear to sand before Finishing!!! Bruce My cutting was pretty neat, so it did not require a lot of sanding. Just needed to smooth everything with a fine grit and fix up the tight intersections a little. However, cutting and sanding Padauk creates that fine red dust that gets all over everything. Although it feel dry, it stick to all surfaces like filings on a magnet. Blaughn 1 Quote Link to comment Share on other sites More sharing options...
Charlie E Posted December 13, 2022 Report Share Posted December 13, 2022 Nice job! FrankEV 1 Quote Link to comment Share on other sites More sharing options...
Blaughn Posted December 13, 2022 Report Share Posted December 13, 2022 5 hours ago, FrankEV said: My cutting was pretty neat, so it did not require a lot of sanding. Just needed to smooth everything with a fine grit and fix up the tight intersections a little. However, cutting and sanding Padauk creates that fine red dust that gets all over everything. Although it feel dry, it stick to all surfaces like filings on a magnet. I hope you are using a mask. I have just finally surrendered and begun to wear one while scrolling and especially sanding. FrankEV 1 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted December 13, 2022 Report Share Posted December 13, 2022 very nice, it's beautiful FrankEV 1 Quote Link to comment Share on other sites More sharing options...
barb.j.enders Posted December 13, 2022 Report Share Posted December 13, 2022 Beautiful! FrankEV 1 Quote Link to comment Share on other sites More sharing options...
wombatie Posted December 15, 2022 Report Share Posted December 15, 2022 Very nice. Marg FrankEV 1 Quote Link to comment Share on other sites More sharing options...
Ron Johnson Posted December 27, 2022 Report Share Posted December 27, 2022 You did a real beautiful job Frank. The Padauk and Maple make a great combination. Happy New Year. FrankEV 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.