Popular Post Ron Johnson Posted December 24, 2022 Popular Post Report Share Posted December 24, 2022 Ah, I can vividly remember my first project going back 24 years. I had just built my 8 x 12 workshop and purchased my first scroll saw. A 16” Craftsman, and couldn’t wait to get started. Photo attached was my first project, and it was a Christmas gift for my mother. I think I spent at least three evenings till midnight completing this. I was finally done and proud as hell. My mother was very pleased, it was the first thing she would put out on display each Christmas season. When she passed in 2007 I received it back. Here it is. A Christmas window scene cut out on ⅛” oak and enclosed within an oak frame and red acrylic backing on a mahogany stand. Now my wife puts it out on display each Christmas season as well. What was your first project and story? Love to hear it. Merry Christmas everyone. barb.j.enders, MidwestTrudell, Phantom Scroller and 15 others 18 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted December 24, 2022 Report Share Posted December 24, 2022 That is a beauty, really a beauty.. well framed and finished. I must look for a similar pattern. danny 1 Quote Link to comment Share on other sites More sharing options...
rjR Posted December 24, 2022 Report Share Posted December 24, 2022 Very fine 1st effort! M<y first efforts fed the cook stove not quite 70 years ago now! Gene Howe 1 Quote Link to comment Share on other sites More sharing options...
Ron Johnson Posted December 24, 2022 Author Report Share Posted December 24, 2022 48 minutes ago, Scrappile said: That is a beauty, really a beauty.. well framed and finished. I must look for a similar pattern. Thanks Paul. I don’t recall who the designer is or where I had acquired the pattern from. Quote Link to comment Share on other sites More sharing options...
Ron Johnson Posted December 24, 2022 Author Report Share Posted December 24, 2022 24 minutes ago, rjR said: Very fine 1st effort! M<y first efforts fed the cook stove not quite 70 years ago now! Thanks Ralph. Quote Link to comment Share on other sites More sharing options...
lawson56 Posted December 24, 2022 Report Share Posted December 24, 2022 I to started with a 16 in Craftsman (Gift from Dad) My first cutting was Winnie The Pooh, for my 1st Granddaughter, who is was 1 at the time and is now 23. Beautiful job by the way. Quote Link to comment Share on other sites More sharing options...
Ron Johnson Posted December 25, 2022 Author Report Share Posted December 25, 2022 18 minutes ago, lawson56 said: I to started with a 16 in Craftsman (Gift from Dad) My first cutting was Winnie The Pooh, for my 1st Granddaughter, who is was 1 at the time and is now 23. Beautiful job by the way. Thanks Bobby. The 16” craftsman was actually a decent machine but it wasn’t long before I moved up to a 20” and then a 30” which I still have. I don’t think I’ll be going any bigger…Lol Quote Link to comment Share on other sites More sharing options...
dgman Posted December 25, 2022 Report Share Posted December 25, 2022 Great looking project Ron! I don’t remember what my first scroll saw project was, it was too long ago! Quote Link to comment Share on other sites More sharing options...
Ron Johnson Posted December 25, 2022 Author Report Share Posted December 25, 2022 59 minutes ago, dgman said: Great looking project Ron! I don’t remember what my first scroll saw project was, it was too long ago! Thanks Dan Quote Link to comment Share on other sites More sharing options...
wombatie Posted December 25, 2022 Report Share Posted December 25, 2022 That is so beautiful. My first cuttings where a scotty dog, a cat and a penguin. My first real big project was a John Wayne portrait back in 2000, for my husband. Marg Quote Link to comment Share on other sites More sharing options...
barb.j.enders Posted December 25, 2022 Report Share Posted December 25, 2022 (edited) It is wonderful to have that keepsake and the story behind it. I don't remember my first project, but I do remember cutting a couple of nativity sets for my daughters and getting so frustrated with trying to get a straight line! Edited December 25, 2022 by barb.j.enders Quote Link to comment Share on other sites More sharing options...
Ron Johnson Posted December 25, 2022 Author Report Share Posted December 25, 2022 13 hours ago, wombatie said: That is so beautiful. My first cuttings where a scotty dog, a cat and a penguin. My first real big project was a John Wayne portrait back in 2000, for my husband. Marg Thanks Marg. Have you any of your first projects? Quote Link to comment Share on other sites More sharing options...
Ron Johnson Posted December 25, 2022 Author Report Share Posted December 25, 2022 3 hours ago, barb.j.enders said: It is wonderful to have that keepsake and the story behind it. I don't remember my first project, but I do remember cutting a couple of nativity sets for my daughters and getting so frustrated with trying to get a straight line! Thanks Barb Quote Link to comment Share on other sites More sharing options...
Gene Howe Posted December 26, 2022 Report Share Posted December 26, 2022 My first experience with scrolling was several years ago with a little Delta saw. I adhered photos to Lexan and cut the human subjects away from the background. Then glued stands to the backs. Rather ugly. At the time, I was making cabinets in the Arts and craft style from QSWO for our new place and cut several Ginko leaves as decoration. After that, I never got back to scrolling and,eventually sold the saw. Now that I've been gifted a nice, hardly used, DeWalt 788, I'm anxious to get back to scrolling. Joining this group and subscribing to Steve Good's news letter, has certainly kept me interested in jumping back in again. I've recently been occupied with several resin coated Mesquite slab tables. Now that they're done and delivered, I can devote the time to re learning scrolling. Not that I'd ever mastered it, before. Quote Link to comment Share on other sites More sharing options...
daveww1 Posted December 26, 2022 Report Share Posted December 26, 2022 very nice Quote Link to comment Share on other sites More sharing options...
Ron Johnson Posted December 26, 2022 Author Report Share Posted December 26, 2022 6 hours ago, Gene Howe said: My first experience with scrolling was several years ago with a little Delta saw. I adhered photos to Lexan and cut the human subjects away from the background. Then glued stands to the backs. Rather ugly. At the time, I was making cabinets in the Arts and craft style from QSWO for our new place and cut several Ginko leaves as decoration. After that, I never got back to scrolling and,eventually sold the saw. Now that I've been gifted a nice, hardly used, DeWalt 788, I'm anxious to get back to scrolling. Joining this group and subscribing to Steve Good's news letter, has certainly kept me interested in jumping back in again. I've recently been occupied with several resin coated Mesquite slab tables. Now that they're done and delivered, I can devote the time to re learning scrolling. Not that I'd ever mastered it, before. Good to hear you’re back at a very enjoyable hobby Gene. One never stops learning because as soon as you think you’ve learned all there is to, someone will show you something you haven’t. The Dewalt you have is a very popular saw. I’m sure you’ll produce some beautiful work from it. Enjoy. Happy New Year. Gene Howe 1 Quote Link to comment Share on other sites More sharing options...
Ron Johnson Posted December 26, 2022 Author Report Share Posted December 26, 2022 4 hours ago, daveww1 said: very nice Thanks Dave Quote Link to comment Share on other sites More sharing options...
Charlie E Posted December 27, 2022 Report Share Posted December 27, 2022 Beautiful heirloom piece! Quote Link to comment Share on other sites More sharing options...
Ron Johnson Posted December 27, 2022 Author Report Share Posted December 27, 2022 53 minutes ago, Charlie E said: Beautiful heirloom piece! Thanks Charlie Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.