Popular Post Dave Monk Posted March 19, 2023 Popular Post Report Share Posted March 19, 2023 I crafted this plaque using ribbon striped (quarter sawed) sapele. When cutting the tree I set my saw at approximately a two degree angle. The tree worked well for this because it was one continuous cut. I pushed the tree out about 1/2 way and did a lot of sanding with a sanding mop. I'm very happy with the look. Greatgrandpawrichard, jerry walters, Old Joe and 34 others 36 1 Quote Link to comment Share on other sites More sharing options...
rjweb Posted March 19, 2023 Report Share Posted March 19, 2023 Dave, what can I say another beautiful piece, you are a real artist, RJ danny, scrollingforsanity, Dave Monk and 1 other 3 1 Quote Link to comment Share on other sites More sharing options...
Peter N White Posted March 19, 2023 Report Share Posted March 19, 2023 Very nice well done. Dave Monk, scrollingforsanity and OCtoolguy 2 1 Quote Link to comment Share on other sites More sharing options...
Dave Monk Posted March 19, 2023 Author Report Share Posted March 19, 2023 2 minutes ago, rjweb said: Dave, what can I say another beautiful piece, you are a real artist, RJ Thanks so much. scrollingforsanity, Blaughn and OCtoolguy 3 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted March 20, 2023 Report Share Posted March 20, 2023 Dave you are a master! That is beautiful! would give any CNC a run for it's money. wombatie, OCtoolguy, scrollingforsanity and 1 other 3 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted March 20, 2023 Report Share Posted March 20, 2023 Beautiful work Dave. As always. You have a real gift for making beautiful stuff. Would you tell me where you find the sapele? When I was looking fo it, I found none from any of the regular sources. I wanted it for the bowl I made and was forced to use padaul instead and now it has darkened to almost brown. Dave Monk and scrollingforsanity 1 1 Quote Link to comment Share on other sites More sharing options...
Sycamore67 Posted March 20, 2023 Report Share Posted March 20, 2023 Very nice and a different technique.! scrollingforsanity and Dave Monk 1 1 Quote Link to comment Share on other sites More sharing options...
Dave Monk Posted March 20, 2023 Author Report Share Posted March 20, 2023 19 minutes ago, OCtoolguy said: Beautiful work Dave. As always. You have a real gift for making beautiful stuff. Would you tell me where you find the sapele? When I was looking fo it, I found none from any of the regular sources. I wanted it for the bowl I made and was forced to use padaul instead and now it has darkened to almost brown. I buy it locally http://www.mckinneyhardwoods.com/ . If you want a small amount I would be happy to ship you some. scrollingforsanity and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
Hawk Posted March 20, 2023 Report Share Posted March 20, 2023 Just curious, what size blade did you use? scrollingforsanity and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
Dave Monk Posted March 20, 2023 Author Report Share Posted March 20, 2023 (edited) 9 hours ago, Hawk said: Just curious, what size blade did you use? The wood is 3/4" and used a pegas #5 MGT blade. Edited March 20, 2023 by Dave Monk Greatgrandpawrichard and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
Dak0ta52 Posted March 20, 2023 Report Share Posted March 20, 2023 Brillant idea and a beautiful piece. Well done. OCtoolguy and Dave Monk 1 1 Quote Link to comment Share on other sites More sharing options...
Matt B Posted March 20, 2023 Report Share Posted March 20, 2023 Dave, I see you have a Hegner and a Pegas. Which did you use for this project. when you buy from McKinney Hardwood, do you go to their location? OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted March 20, 2023 Report Share Posted March 20, 2023 1 hour ago, Dave Monk said: The wood is 3/4" and used a pegas MGT blade. What size blade? Quote Link to comment Share on other sites More sharing options...
wombatie Posted March 20, 2023 Report Share Posted March 20, 2023 Another beautiful piece Dave. And thanks for the tip. Marg Dave Monk and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted March 20, 2023 Report Share Posted March 20, 2023 I thought maybe you bought a CNC until I read the description.. That's really cool... OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Dave Monk Posted March 20, 2023 Author Report Share Posted March 20, 2023 8 hours ago, Matt B said: Dave, I see you have a Hegner and a Pegas. Which did you use for this project. when you buy from McKinney Hardwood, do you go to their location? I do go to their location. It is actually a guy that has a building behind his house that he keeps lumber in. I don't buy much from him because of their limited inventory. Last time I went he had 1/2 dozen very nice 1/4 sawed sapele boards. Most of my wood I get from Dallas Hardwood. I use usually use my Pegas for any angle work I do and my Hegner for anything else. The Hegner is a work horse and will outlast the Pegas by a long shot. I use my Pegas scroll band saw for most of my Intarsia work. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Dave Monk Posted March 20, 2023 Author Report Share Posted March 20, 2023 7 hours ago, OCtoolguy said: What size blade? Sorry. #5 OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Dave Monk Posted March 20, 2023 Author Report Share Posted March 20, 2023 6 hours ago, wombatie said: Another beautiful piece Dave. And thanks for the tip. Marg You are more than welcome. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Dave Monk Posted March 20, 2023 Author Report Share Posted March 20, 2023 52 minutes ago, kmmcrafts said: I thought maybe you bought a CNC until I read the description.. That's really cool... Thanks Kevin. I really have no desire to own a CNC. I can find enough to do with the equipment I have to satisfy me. Scrappile, kmmcrafts and OCtoolguy 3 Quote Link to comment Share on other sites More sharing options...
Gonzo Posted March 20, 2023 Report Share Posted March 20, 2023 Very nice! Dave Monk and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted March 20, 2023 Report Share Posted March 20, 2023 fantastic job OCtoolguy and Dave Monk 1 1 Quote Link to comment Share on other sites More sharing options...
barb.j.enders Posted March 20, 2023 Report Share Posted March 20, 2023 Beautiful piece. OCtoolguy and Dave Monk 1 1 Quote Link to comment Share on other sites More sharing options...
Norm Fengstad Posted March 20, 2023 Report Share Posted March 20, 2023 very nice, Dave Monk and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
rjweb Posted March 20, 2023 Report Share Posted March 20, 2023 Dave, did you say you have a pegas band saw, RJ Dave Monk and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted March 20, 2023 Report Share Posted March 20, 2023 Dave, I'm curious about the date on your plaque. What exactly does it commemmorate that hasn't happened yet? Is it a wedding thing for future use? I love the pattern. Where'd you find it? Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.