Scruffydog Posted March 31, 2023 Report Share Posted March 31, 2023 Here is my latest project for a friend at work. Made from mystery wood that came from a knife block cut into individual boards. Hope he likes it. But, I haven't applied a finish yet and am looking for suggestions. I'll be putting magnets on the bottom for the cubicle wall. Comments appreciated. heppnerguy, lawson56, jr42 and 6 others 9 Quote Link to comment Share on other sites More sharing options...
Fab4 Posted March 31, 2023 Report Share Posted March 31, 2023 Hi Doug: Looks good, easy to read You may want to narrow the base a bit I would go with a natural stain. just my 2 cents worth Fab4 Scruffydog and danny 1 1 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted March 31, 2023 Report Share Posted March 31, 2023 nicely cut. Everyone seems to enjoy their name in wood. It should be a big hit with him. Dick heppnerguy Scruffydog 1 Quote Link to comment Share on other sites More sharing options...
wombatie Posted April 1, 2023 Report Share Posted April 1, 2023 Dan will love it. Maybe some Danish oil? Marg danny 1 Quote Link to comment Share on other sites More sharing options...
Dak0ta52 Posted April 1, 2023 Report Share Posted April 1, 2023 Nice cutting. I would suggest Boiled Linseed Oil and Polyurethane 50/50 mix. Let it soak about 10 minutes, let it drip for about 45 minutes and wipe it down good. Give it a good buffing. For a little more sheen, apply a little paste wax and buff it out again. Quote Link to comment Share on other sites More sharing options...
Ron Johnson Posted April 1, 2023 Report Share Posted April 1, 2023 well done Doug Quote Link to comment Share on other sites More sharing options...
daveww1 Posted April 1, 2023 Report Share Posted April 1, 2023 very nice job Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.