Popular Post FrankEV Posted May 16, 2023 Popular Post Report Share Posted May 16, 2023 I need a clock for my shop. A few weeks ago I asked, in PATTERN REQUEST, if anyone had a pattern for clock face for a shop clock that depicted Scrolling. Did not get any usable responses so I decided I needed to make my own. I believe I adopted the pattern of a “Person at a Scroll Saw” from Steve Good’s library quite a while ago, which I have been using to make my “Scroll Saw Art by Frank” signs and I have also included it in my Logo. I figured I could adapt the pattern by adding some bridges to make it a negative cutting and wrap the clock face hour numerals around it. I found a simple clock face I liked on-line. This is what I came up with. The clock face is a 10” diameter 5/32” thick solid core Maple cut panel affixed to a 10” diameter 1/4” BB Ply Backer painted rattle can Flat Black. The Pattern starts out as an 11” x 11” square. I cut the disk out after the cut panel and backer are glued together. The numerals were cut using a Pegas #0 Spiral Blade and the center pattern using a Pegas #3 MGT R blade. The assembled disk was protected with multiple coats of clear spray Acrylic finish. I purchased a “High Torque Long Shaft Quartz HR1688 Clock Movement Mechanism Replacement Clock Kit with 5.4 Inch Long Spade Hands for DIY Handicrafts Repair Clock Parts Shaft Lengths 22.5mm / 0.89 inch” for $9.49 from Amazon. I had used this item for the Dragon Clock I made a while ago that had a larger diameter and made athe mistake of just reordering the same one. The hands are too long for this smaller diameter clock. I should order new shorter hands, but probably won't bother. I made this clock too quickly and there are lots of goofs in both the cutting and finishing, but it will do for hanging in my shop. I will post the pattern in New Pattern Announcements’. Comments welcome but you can skip the critiques. snikolaev28, Dak0ta52, brew and 11 others 14 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted May 16, 2023 Report Share Posted May 16, 2023 very nice FrankEV 1 Quote Link to comment Share on other sites More sharing options...
Scrolling Steve Posted May 19, 2023 Report Share Posted May 19, 2023 That is one nice shop clock....Well done! FrankEV and danny 2 Quote Link to comment Share on other sites More sharing options...
woodman11 Posted May 19, 2023 Report Share Posted May 19, 2023 Like the clock. thanks for the pattern. FrankEV 1 Quote Link to comment Share on other sites More sharing options...
Peter N White Posted May 19, 2023 Report Share Posted May 19, 2023 That is very well done. FrankEV 1 Quote Link to comment Share on other sites More sharing options...
FrankEV Posted May 30, 2023 Author Report Share Posted May 30, 2023 In todays (5/30/23) email from Steve Good, he offered his version of a shop clock which is very nice. Here is a link for those who do not get his daily Email: Male and Female Scrollers Clock Scroll Saw Pattern. Quote Link to comment Share on other sites More sharing options...
MarieC Posted May 31, 2023 Report Share Posted May 31, 2023 I really like yours! Well done! FrankEV and danny 1 1 Quote Link to comment Share on other sites More sharing options...
Gene Howe Posted June 1, 2023 Report Share Posted June 1, 2023 Very nice clock. I want to make this one. danny, FrankEV, barb.j.enders and 1 other 2 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.