Saw table sticky.

[AlRosenberger]

I had a sticky table on my saw. I have cleaned the surface and it is better but, I was wondering if putting clear silicon on it would be a good way to protect it. Has anyone done this or something similar?

[Paladin]

I've used paste wax with good results for years.

[BadBob]

Clean it with mineral spirits and wax it with paste wax.

Don't use wax designed for cars. Johnson's Paste wax is my go-to for this, but they stopped making it.

Silicon and woodworking tools don't go together well. If the silicon gets on your project, you could have issues with finishes not sticking.

 

[dgman]

Never ever use silicone on any woodworking tools! As BadBob mentioned, silicone will interfere with some finishes. As was mentioned, use a paste wax that does not contain silicone. Most car wax’s contain silicone. Use a paste wax designed for woodworking. You can find paste wax in the paint section of most hardware stores or paint store.

[BadBob]

24 minutes ago, dgman said:

You can find paste wax in the paint section of most hardware stores or paint store.

If it is not with the paint, look in the cleaning supplies. That is where my local Ace Hardware had it when I stocked up on my Johnsons Paste Wax.

[Robert R]

I feel paste wax is the best option to go with. I've been using it on my table saw and sander table as well, for years.