Popular Post Denny Knappen Posted August 14, 2023 Popular Post Report Share Posted August 14, 2023 I finished it this weekend. A Pelican puzzle pattern by Harvey Blyer. I used 3/4" Poplar approximately 6" x 8". Cut on the Pegas Scroll Saw using Pegas #3 MGT blades. After a light sanding with a Mac Mop, dipped in diluted Shellac and another light sanding. Comments welcome. artisanpirate, jollyred, TAIrving and 10 others 13 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted August 15, 2023 Report Share Posted August 15, 2023 very nice Quote Link to comment Share on other sites More sharing options...
Ron Johnson Posted August 15, 2023 Report Share Posted August 15, 2023 Very nicely done Denny. Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted August 15, 2023 Author Report Share Posted August 15, 2023 3 hours ago, daveww1 said: very nice Thanks Dave Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted August 15, 2023 Report Share Posted August 15, 2023 Nice puzzle. They are fun and easy to make too. I am amazed at how well they sell too. Dick heppnerguy Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted August 15, 2023 Author Report Share Posted August 15, 2023 25 minutes ago, heppnerguy said: Nice puzzle. They are fun and easy to make too. I am amazed at how well they sell too. Dick heppnerguy Thanks Dick. Sold a Dinosaur yesterday. heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
Dak0ta52 Posted August 15, 2023 Report Share Posted August 15, 2023 Another nice piece, Denny Quote Link to comment Share on other sites More sharing options...
rjweb Posted August 15, 2023 Report Share Posted August 15, 2023 Denny, you have done an excellent job, RJ Quote Link to comment Share on other sites More sharing options...
Peter N White Posted August 15, 2023 Report Share Posted August 15, 2023 Very nicely done. Quote Link to comment Share on other sites More sharing options...
wombatie Posted August 16, 2023 Report Share Posted August 16, 2023 Fabulous work Denny. We have lots of pelicans near to us, they fly over regularly, they are one of my favorite birds. Marg Quote Link to comment Share on other sites More sharing options...
MarieC Posted August 16, 2023 Report Share Posted August 16, 2023 Denny, nice work. Looks like a fun puzzle for someone. Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted August 16, 2023 Author Report Share Posted August 16, 2023 19 hours ago, Dak0ta52 said: Another nice piece, Denny Thanks Rodney. How is the new saw? Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted August 16, 2023 Author Report Share Posted August 16, 2023 17 hours ago, rjweb said: Denny, you have done an excellent job, RJ Thanks RJ. Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted August 16, 2023 Author Report Share Posted August 16, 2023 10 hours ago, wombatie said: Fabulous work Denny. We have lots of pelicans near to us, they fly over regularly, they are one of my favorite birds. Marg Thanks Marg. No Pelicans here in Tennessee Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted August 16, 2023 Author Report Share Posted August 16, 2023 9 hours ago, MarieC said: Denny, nice work. Looks like a fun puzzle for someone. Thanks Marie. Quote Link to comment Share on other sites More sharing options...
Dak0ta52 Posted August 16, 2023 Report Share Posted August 16, 2023 4 hours ago, Denny Knappen said: Thanks Rodney. How is the new saw? AWESOME!!! It took a little while for me to get it set properly. I had to adjust the upper arm tension and align the blade clamps so they were centered properly in the table hole, but WOW, what a difference. The WEN I was using gave me good service considering it is a $100 saw. The vibration wasn't bad at all, it was just having to replace the blade clamps about every month. The new Pegas is heavy, quiet and extremely smooth! It will pass the nickle test throughout the entire speed range. Being able to lift the upper arm to feed blades and then simply moving a lever to apply tension makes cutting so much simpler and FASTER! I highly recommend the Pegas-30 and I also recommend Artcraftersonline.com as the dealer of choice. I haven't cut a piece that would require the 30-inch throat but I have a pattern that will require this as soon as I purchase the wood I plan to use. I'll also have to build a couple side stands to support the piece. Thanks again, Denny for the great service and fantastic deal. Quote Link to comment Share on other sites More sharing options...
Charlie E Posted August 17, 2023 Report Share Posted August 17, 2023 Nice job! Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted August 17, 2023 Author Report Share Posted August 17, 2023 3 hours ago, Charlie E said: Nice job! Thanks Charlie Charlie E 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.