Still on the Dog Theme

[Dak0ta52]

I've been focused on the dog theme due to several requests I've had recently. The first is a Jim Blume pattern cut on 1/4-inch Maple ply stained with Natural with a 1/4-inch Pine backer painted black. The frame is custom cut pre-fab framing material. The duo Aussies are a pattern by Tutor cut on 1/4-inch Maple ply. One is stained with Natural with a 1/4-inch Pine backer painted black and the other is stained with Ipswich with a 1/4-inch Pine backer stained with Espresso. These were also framed with pre-fab framing material cut to size. The last is a Steve Good pattern on Maple and again a black Pine backer. All pieces were sprayed with 4-coats of Polyacrylic with light sanding between coats. The three Aussie pieces were cut using Pegas 2/0 Spiral blades. The Hound piece was cut using Pegas 0 Super Skip blades. All were cut on the new Pegas saw which is so much faster than my WEN. All were cut within the time it would have taken to cut only one of the Aussie pieces on the WEN. I'll also add the Aussie pieces were much easier to cut than you would think by looking at the patterns. There was only one area that was a little weak on the Tutor pattern but not so much I wasn't afraid to hit it with the palm sander after it was finished. The Steve Good pattern was a really easy cut.

[Ron Johnson]

Very fine cutting Rodney

[Gene Howe]

Nice! Gave a laugh for the last one.

[Scrappile]

Very will cut, finished and presented!  

[rjweb]

Excellent craftsmanship, RJ