Travis Posted September 8, 2023 Report Share Posted September 8, 2023 This is the easiest scroll saw challenge yet! Post your most recent project. That's it! No theme other than your last project. It'd be fun to see what folks are working on. When you post, tell us why or who you are making it for. It's always nice to hear the story behind a project. Quote Link to comment Share on other sites More sharing options...
Popular Post rafairchild2 Posted September 8, 2023 Popular Post Report Share Posted September 8, 2023 Did two spoons out of the same slab of Cherry. Have not been in the shop much due to the heat, and also extra hours at work. Wichman, MidwestTrudell, ChelCass and 19 others 20 2 Quote Link to comment Share on other sites More sharing options...
Popular Post Wichman Posted September 8, 2023 Popular Post Report Share Posted September 8, 2023 Various projects for the market; drying in the shop. I have several lengths of rebar, so I utilizing it for drying projects. Gordster, JackJones, Jronn65 and 15 others 18 Quote Link to comment Share on other sites More sharing options...
Popular Post Dave Monk Posted September 8, 2023 Popular Post Report Share Posted September 8, 2023 Heceta head lighthouse intarsia. Fish, Charlie E, Gordster and 22 others 22 3 Quote Link to comment Share on other sites More sharing options...
rjweb Posted September 8, 2023 Report Share Posted September 8, 2023 Dave, that is another beautiful piece, RJ Dave Monk 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Tom123055 Posted September 9, 2023 Popular Post Report Share Posted September 9, 2023 My own pattern for a segmented Jimmy Buffet tribute. meflick, Gene Howe, Wichman and 18 others 21 Quote Link to comment Share on other sites More sharing options...
Popular Post Jronn65 Posted September 9, 2023 Popular Post Report Share Posted September 9, 2023 I've been on a Christmas topic for a while. This another Sue Mey pattern to share. Juan Rodriguez, namunolie, ChelCass and 15 others 18 Quote Link to comment Share on other sites More sharing options...
Popular Post preprius Posted September 9, 2023 Popular Post Report Share Posted September 9, 2023 Project complete Team Tokens. 27 inlay tokens for engineering team I work with. I wanted some inlay practice. See my other long post for what the symbol is. Warning I kinda got too technical. Scrappile, Gordster, ChelCass and 11 others 14 Quote Link to comment Share on other sites More sharing options...
Popular Post Gordster Posted September 9, 2023 Popular Post Report Share Posted September 9, 2023 Personalized enitials. Scrappile, ChelCass, Wichman and 11 others 14 Quote Link to comment Share on other sites More sharing options...
Popular Post BadBob Posted September 9, 2023 Popular Post Report Share Posted September 9, 2023 I am trying to use a stack of random length and thickness wood pieces. I pick up a piece of wood and think: What can I cut from this? Dave Monk, JackJones, Wichman and 12 others 15 Quote Link to comment Share on other sites More sharing options...
Popular Post BadBob Posted September 9, 2023 Popular Post Report Share Posted September 9, 2023 I cut this skull and crossbones for my grandson. I cut it from baltic birch plywood. We are still debating how to finish it. mike connor, Gordster, Travis and 14 others 17 Quote Link to comment Share on other sites More sharing options...
Popular Post RabidAlien Posted September 10, 2023 Popular Post Report Share Posted September 10, 2023 Last three I cut, kirigami papercutting patterns from https://lightboxgoodman.com/. Cut them for myself, just trying to find places to put them since the wife is getting a bit tired of all the "wood colors" around the house. LOL JackJones, JessL, namunolie and 14 others 17 Quote Link to comment Share on other sites More sharing options...
Popular Post Insane Dust Maker Posted September 11, 2023 Popular Post Report Share Posted September 11, 2023 This was done for a client on 1/4 Birch Ply, finished with Danish Oil, light Oak Stain and varnished. She’s very happy with the result. Travis, Scrappile, namunolie and 10 others 13 Quote Link to comment Share on other sites More sharing options...
Dak0ta52 Posted September 11, 2023 Report Share Posted September 11, 2023 Nicely cut, Don. Quote Link to comment Share on other sites More sharing options...
Popular Post rash_powder Posted September 12, 2023 Popular Post Report Share Posted September 12, 2023 I don’t know if this counts as a ‘latest scroll saw project’; but it is a project and it is for my scroll saw. it’s a below-the-table dust pickup for my Hegner VS22. All those Seyco, Excalibur, and Jet saws with the through the table pickups had me jealous, so I’m correcting it. i e to drill the hole through the dust port, and then hot glue it under the table. There’s a pair of strengthening ribs under it this will fit between. Then an adapter for my loc-line pipe and I get to try it out. Hopefully it won’t be in the way too much. If I don’t like it I can easily cut the hot glue loose and put it comes. it’s made from PVC pipe heated and flattened/shaped as needed. No scroll saw was used, however. All hand saws, chisels, heat gun, etc. if not allowed feel free to delete post! Scrappile, Travis, Fish and 7 others 10 Quote Link to comment Share on other sites More sharing options...
Popular Post Scrappile Posted September 12, 2023 Popular Post Report Share Posted September 12, 2023 I am having a problem with starting projects but not getting them finished. Has something to do with my age. But I did finish this one after I had started three other things. rdatelle, Travis, jimmyG and 12 others 15 Quote Link to comment Share on other sites More sharing options...
Popular Post Ricky33 Posted September 12, 2023 Popular Post Report Share Posted September 12, 2023 My last projects have been Christmas ornaments Dave Monk, RabidAlien, Jronn65 and 10 others 13 Quote Link to comment Share on other sites More sharing options...
Popular Post Kris Martinson Posted September 12, 2023 Popular Post Report Share Posted September 12, 2023 I made this Jim Blume pattern dragon for my grandson. Backlit with LED strip lights. Wichman, Ron Johnson, RabidAlien and 13 others 15 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Ron Johnson Posted September 16, 2023 Popular Post Report Share Posted September 16, 2023 My latest project was mini model A cars. They are so cute and fun to make that I made a second batch of 18. These are for my upcoming shows. I’m currently working on a fleet of Kenworths which will soon be completed. Scrappile, ChelCass, JackJones and 12 others 13 2 Quote Link to comment Share on other sites More sharing options...
Gene Howe Posted September 16, 2023 Report Share Posted September 16, 2023 1 hour ago, Ron Johnson said: My latest project was mini model A cars. They are so cute and fun to make that I made a second batch of 18. These are for my upcoming shows. I’m currently working on a fleet of Kenworths which will soon be completed. Thanks for the link, Ron. Quote Link to comment Share on other sites More sharing options...
Popular Post rafairchild2 Posted September 17, 2023 Popular Post Report Share Posted September 17, 2023 Another one. MarieC, Travis, ChelCass and 12 others 15 Quote Link to comment Share on other sites More sharing options...
Peter N White Posted September 17, 2023 Report Share Posted September 17, 2023 Great looking puzzle. Quote Link to comment Share on other sites More sharing options...
Popular Post Thruster Posted September 17, 2023 Popular Post Report Share Posted September 17, 2023 (edited) This is an Alex Fox pattern my daughter bought me for Father’s Day. After finishing it, guess who wanted it for her apartment, hahaha! Edited September 17, 2023 by Thruster MarieC, Dave Monk, Travis and 11 others 14 Quote Link to comment Share on other sites More sharing options...
Loskoppie Posted September 18, 2023 Report Share Posted September 18, 2023 To all Your work is beautiful well done. Barbara rdatelle and Wichman 1 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Randyw81 Posted September 19, 2023 Popular Post Report Share Posted September 19, 2023 (edited) I made the wine holder for my wife's birthday. It turned into 2 more for birthday presents and now she wants 4 more to give as Christmas gifts. I also started Christmas ornaments for the season Edited September 20, 2023 by Randyw81 Spelling RabidAlien, JessL, wombatie and 7 others 10 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.