Christmas Ornament Holder

[Hawk]

I've been scouring all the places I know for a pattern of a Christmas tree ornament holder. I can find plenty of pictures, but no patterns. My plan B is to make my own pattern, but it sure would be nice if any  of y'all know where I can get one!

 

Thanks, Chris

[BadBob]

Steve Good has several, but as I recall, they are all contained in the ornament patterns. They only hold one ornament.

[ChelCass]

Check Sue Mey's site, she has a large selection of ornament holders.  

[Joe W.]

I made this display using 1/4" plywood, some wood dowels, a handle from a broom, and a couple PVC couplings. And some paint.
It holds 80 ornaments and spins around easy.
the handle sticks out of the top about 5".
The box part is suspended from the bottom by putting the PVC couplings on the handle and keeping them in place by drilling a hole thru the handle and putting a nail thru the hole - the PVC coupling rests on the nail, keeping it in place and from falling.  - one on the top and one close/near the bottom.
I can supply more photos/details if you are interested.


I  

[barb.j.enders]

I repurposed a kitchen tool for displaying ornaments.  This is what I use.  https://www.stokesstores.com/thinkkitchen-napoli-pasta-dryer.html?utm_source=display&utm_medium=cpc&utm_term&=utm_campaign=[IMJ] PMAX - Mid-Margin Products - EN&gad_source=1&gclid=Cj0KCQiA6vaqBhCbARIsACF9M6nYxljgQ3_u0iF7v1z2Qp8UOZV1gEp7NtH5FD7JuvphWTqNMWylHXIaAjzoEALw_wcB

[Joe W.]

12 hours ago, barb.j.enders said:

I repurposed a kitchen tool for displaying ornaments. 

Wow!  That's a lot simpler than what I did.  Looks like it can/could break down for easy transport too.
And something most anyone could make. 

[barb.j.enders]

10 hours ago, Joe W. said:

Wow!  That's a lot simpler than what I did.  Looks like it can/could break down for easy transport too.
And something most anyone could make. 

I flat packs for easy transport.  I have also made one from a scrap square dowel, drilled the holes for the round dowels and put it on a lazy susan base.  

[CharleyL]

You might want to search for "Banana Hook" or "Banana Holder". If no plans are available, just looking at the photos should allow you to make your own version. They are quite simple in design.

Charley