Popular Post Montserrat Posted January 7 Popular Post Report Share Posted January 7 Of course the project I finished last. My Paisley Rabbitt. However, I also loved my books on the mind projects. Sycamore67, Wichman, meflick and 17 others 15 5 Quote Link to comment Share on other sites More sharing options...
Popular Post Sycamore67 Posted January 8 Popular Post Report Share Posted January 8 I haven't done as much scrollsaw this year but this is my favorite. Most of parts were first scroll sawed and the shaped. It is a Model A Ford. I did this as my dad and i worked on a 1929 Model A when i was in high school. Scrappile, flarud, Wichman and 17 others 18 2 Quote Link to comment Share on other sites More sharing options...
Popular Post preprius Posted January 8 Popular Post Report Share Posted January 8 My favorite is my wearable wooden cowboy hat. But since I did not make any new hats last year. I will have to go with what I have made. Just finished. An appreciation award for the project lead at work. Wood is Pepperwood. The circle in the middle is a silicon wafer. The 2 circles are silicon die, little squares cut from wafers. "Pepperdine" was the project code name so I had to find pepperwood. I used relief angle cuts to make his name protrude from the surface. Wood stain was called Colonial, a darkish brown. I wanted a darker frame around a shiny center. Wood finish is "Arm R Seal". I used a polyester resin water clear to pour over the wafer material circles. Henry had 2 direct engineers assigned to him. The 2 moons signify 2 Jr. guys. The TPL ring signifies Tecnical Product Lead. The ring has magnets to be able to remove it. It is made with 1/4" butternut wood. MarieC, Fab4, ChelCass and 10 others 11 2 Quote Link to comment Share on other sites More sharing options...
Popular Post Tbow388 Posted January 8 Popular Post Report Share Posted January 8 My favorite project this year would have been the Handymans Tool Box that I made for my son for Christmas. Not much scrolling except for the sides and the handle. All made out of oak with an Alder handle. Wichman, meflick, JessL and 9 others 12 Quote Link to comment Share on other sites More sharing options...
Popular Post Ron Johnson Posted January 8 Popular Post Report Share Posted January 8 My favourite project was making a third rocking horse. The first two were made 22 years ago for at that time my two grandchildren. They still have them and will be passed on to their children to enjoy. So the past year I decided to make a third one for display when doing shows. The first two were made out of Ash and the third one was made out of Walnut and Ash. Size is 45” x 16” x 36”. Gonzo, Travis, OCtoolguy and 17 others 15 5 Quote Link to comment Share on other sites More sharing options...
Hudson River Rick Posted January 9 Report Share Posted January 9 @Ron Johnson GIDDY YAP Ron. Those ponies will be around for many generations, great work. Thanks for sharing. Rick OCtoolguy, MarieC and Tbow388 3 Quote Link to comment Share on other sites More sharing options...
flarud Posted January 9 Report Share Posted January 9 After seeing everyone else's,,, I would like to remove mine!! LOL OCtoolguy and MarieC 2 Quote Link to comment Share on other sites More sharing options...
Popular Post scrollerpete Posted January 9 Popular Post Report Share Posted January 9 This was a custom order and I enjoy the end result more than the cutting but at the end of the year it was my favorite. Coming close second was this charcuterie board OCtoolguy, RabidAlien, Wichman and 11 others 14 Quote Link to comment Share on other sites More sharing options...
Popular Post Scrolling along with Susan Posted January 11 Popular Post Report Share Posted January 11 I am part of the Herb Society of America and we love hummingbirds. I made a hummingbird plaque for the outgoing president. I enjoy segmentation and working with various types of wood stack-cutting. Hopefully it is a gift she will cherish for years to come. Ron Johnson, RabidAlien, preprius and 10 others 13 Quote Link to comment Share on other sites More sharing options...
Hudson River Rick Posted January 11 Report Share Posted January 11 Very nicley done Susan. Thanks for showing your work to us. Rick Scrolling along with Susan 1 Quote Link to comment Share on other sites More sharing options...
rjweb Posted January 11 Report Share Posted January 11 Very nice Susan, I believe you have a youtube channel that i have subscriped to, if it is the right Susan, thx RJ Quote Link to comment Share on other sites More sharing options...
Sycamore67 Posted January 12 Report Share Posted January 12 This is a great thread with lots of wonderful projects and a wide variety. Thanks everyone for posting. And thanks for the kind Likes on my entry to this thread. Fab4 and Ron Johnson 2 Quote Link to comment Share on other sites More sharing options...
Popular Post Gonzo Posted January 15 Popular Post Report Share Posted January 15 (edited) My favorite would be this chess set I made for my son in law. I also made one for my nephew. Mahogany and Birch. Edited January 15 by Gonzo RabidAlien, Wichman, meflick and 8 others 10 1 Quote Link to comment Share on other sites More sharing options...
rjweb Posted January 15 Report Share Posted January 15 Beautiful job on the chess set, RJ Quote Link to comment Share on other sites More sharing options...
Gonzo Posted January 16 Report Share Posted January 16 3 hours ago, rjweb said: Beautiful job on the chess set, RJ Thank you! Quote Link to comment Share on other sites More sharing options...
Scrolling along with Susan Posted January 23 Report Share Posted January 23 On 1/11/2024 at 4:28 PM, rjweb said: Very nice Susan, I believe you have a youtube channel that i have subscriped to, if it is the right Susan, thx RJ Thanks. Yes, that's me with the youtube channel. Quote Link to comment Share on other sites More sharing options...
Travis Posted February 4 Author Report Share Posted February 4 I created a slideshow of the Favorite Projects Scroll Saw Challenge. It's kinda fun to see. I wouldn't mind doing this for the new scroll saw challenges. It's a lot of work, though. Anyway, feel free to share it on your social media. It's fun to show to friends and family. Enjoy! Fab4, ChelCass, Jim McDonald and 3 others 3 3 Quote Link to comment Share on other sites More sharing options...
jerry walters Posted February 4 Report Share Posted February 4 Very cool Travis. I did enjoy it. Jerry Quote Link to comment Share on other sites More sharing options...
Scrappile Posted February 4 Report Share Posted February 4 Thanks, Travis. The is neat! Quote Link to comment Share on other sites More sharing options...
Fab4 Posted February 5 Report Share Posted February 5 Hi Travis: A lot a work on your side, I'm sure, but well worth it when you're sitting on this side of the fence It's different and well done Thanks Fab4 Quote Link to comment Share on other sites More sharing options...
barb.j.enders Posted February 5 Report Share Posted February 5 Thanks for the video. Saw a few things there that I didn't see scrolling through the thread. Quote Link to comment Share on other sites More sharing options...
JessL Posted February 5 Report Share Posted February 5 Thanks. I like it! Scrolling along with Susan 1 Quote Link to comment Share on other sites More sharing options...
Scrolling along with Susan Posted March 11 Report Share Posted March 11 On 1/11/2024 at 4:28 PM, rjweb said: Very nice Susan, I believe you have a youtube channel that i have subscriped to, if it is the right Susan, thx RJ Yes that's me. Thanks for watching! Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.