Popular Post Scrappile Posted March 21 Popular Post Report Share Posted March 21 (edited) I finally completed this project. I took me the longest of any project I have tried in my years of scrolling. Took two tries. I wanted to make a picture of a modern diesel train engine for my nephew-in-law that is a conductor. I could not find a pattern of one. Talking to @munzieb one time I mentioned it to him, he told to send him a picture of what you want and he would make a pattern. And he did, a real detailed pattern. A beautiful pattern.. I worked on it, gave up once, then decided to try again. I worked on this over a period of 4 or 5 months. Bernd Would call every once in a while to see how I was doing. I told him I was about to give up. I just could not scroll like I use to. He said he would give it a try. Two weeks latter he sends me his completed scrolled picture of it! So the challenge was thrown down. I had to quit whining and keep cutting. Finally got there. Many, many thanks to Bernd for the coaching and encouragement. Would never have finished it without it. I still have to frame it. The first picture is mine, the second is the one he cut and sent to me. His was even more difficult than mine, his was a little smaller. Edited March 21 by Scrappile Matt B, munzieb, OCtoolguy and 35 others 25 1 12 Quote Link to comment Share on other sites More sharing options...
dgman Posted March 21 Report Share Posted March 21 Congratulations Paul! A wonderful rendition sure to please your Buddy! danny, Scrappile and OCtoolguy 2 1 Quote Link to comment Share on other sites More sharing options...
JessL Posted March 21 Report Share Posted March 21 Fantastic job. Such detail. Love it. OCtoolguy, Scrappile and danny 2 1 Quote Link to comment Share on other sites More sharing options...
JTTHECLOCKMAN Posted March 21 Report Share Posted March 21 There is some fine detail in there. That is what makes it stand out. Beautiful work. Scrappile and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
Peter N White Posted March 21 Report Share Posted March 21 Top class very fine detail work to make it so great. Scrappile and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
Dak0ta52 Posted March 21 Report Share Posted March 21 Both are great cuttings. I rather enjoy when patterns have heavy detail. I just look at it as "one hole at a time." Scrappile, GPscroller, OCtoolguy and 1 other 2 2 Quote Link to comment Share on other sites More sharing options...
barb.j.enders Posted March 21 Report Share Posted March 21 Great job Paul! OCtoolguy and Scrappile 1 1 Quote Link to comment Share on other sites More sharing options...
jerry walters Posted March 22 Report Share Posted March 22 Man, that is great Paul. Bernd is a great guy and has helped me. Sometimes we all need a shove and a little encouragement, especially when that encouragement comes from a friend. Jerry Scrappile, OCtoolguy and munzieb 2 1 Quote Link to comment Share on other sites More sharing options...
munzieb Posted March 22 Report Share Posted March 22 The original Photo. This was the hardest project I've ever done. I am not a designer, I'm only a pixel eater using MS 3D paint. Too old to learn newer software. Paul did fantastic cutting. Something to be very proud of. It only took him so long to finish because he kept going back to playing his street organ, Ha! JessL, Scrappile, OCtoolguy and 3 others 2 2 2 Quote Link to comment Share on other sites More sharing options...
TAIrving Posted March 22 Report Share Posted March 22 Call out to both Pete @Scrappile and Bernd @munzieb for great pattern and great cuttings. Persistence pays! Scrappile, OCtoolguy and munzieb 1 2 Quote Link to comment Share on other sites More sharing options...
Gordster Posted March 22 Report Share Posted March 22 Great job on pattern and the cutting. Scrappile and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
rjweb Posted March 22 Report Share Posted March 22 Paul, you have done a beautiful job, RJ Scrappile and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
Dave Monk Posted March 23 Report Share Posted March 23 Awesome job Paul. Way to hang in there. Well worth it. Scrappile and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
Charlie E Posted March 23 Report Share Posted March 23 Wow! You just can’t help but stop and stare at that for a while. Amazing work! OCtoolguy and Scrappile 1 1 Quote Link to comment Share on other sites More sharing options...
MarieC Posted March 23 Report Share Posted March 23 Paul, That is amazing! It looks like it is ready to move right out of the picture frame. I can't believe the detail. Excellent work...Now I hope you get to buy your new lawn mower and start mowing. I see it has been quite warm down in your neck of the woods. ....Also, to get those longer straight lines, did use a razor or something to score the wood before cutting it? Scrappile and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted March 23 Author Report Share Posted March 23 1 hour ago, MarieC said: Paul, That is amazing! It looks like it is ready to move right out of the picture frame. I can't believe the detail. Excellent work...Now I hope you get to buy your new lawn mower and start mowing. I see it has been quite warm down in your neck of the woods. ....Also, to get those longer straight lines, did use a razor or something to score the wood before cutting it? Thanks Marie, You know I have used the scoring method in the past and it really worked well...Never even thought about on the cutting when I needed it most... ! Where you with the reminder three months ago?! I bought a used mower. Only 40 hours on it. Looks good but I probably got took. I have not used it yet, want to do a 50 hour tune up on it first. MarieC and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
Gonzo Posted March 24 Report Share Posted March 24 Wow! Both pieces are amazing! As one who loves model railroading (and anything to do with trains) that is right up my wheelhouse. Going back and forth from photo to the two pieces, it just blows me away. Scrappile and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
preprius Posted March 24 Report Share Posted March 24 Here is some specifications for that engine... You might use something from this site for frame labels. https://en.wikipedia.org/wiki/GE_Dash_9-44CW OCtoolguy and Scrappile 1 1 Quote Link to comment Share on other sites More sharing options...
GPscroller Posted March 24 Report Share Posted March 24 Beautiful job by both of you, Great pattern and cutting. Jeff munzieb, Scrappile and OCtoolguy 2 1 Quote Link to comment Share on other sites More sharing options...
Scrolling Steve Posted March 25 Report Share Posted March 25 Wow!....Very nice work! OCtoolguy and Scrappile 1 1 Quote Link to comment Share on other sites More sharing options...
Joe W. Posted March 27 Report Share Posted March 27 Ditto what Scrolling Steve said above !!! OCtoolguy and Scrappile 1 1 Quote Link to comment Share on other sites More sharing options...
wombatie Posted March 27 Report Share Posted March 27 Wow you both deserve a medal. The pattern is awesome but the cutting is amazing. Great work guys. Marg Scrappile, OCtoolguy and munzieb 1 2 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted March 28 Report Share Posted March 28 You guys amaze me. Both of you are so talented. Beautiful job on cutting and pattern making. Did you use spirals on them? I've just bought a batch of blades to cut a peacock lamp that Bernd was kind enough to share his pattern with me. I hope to get going again once my wife is back to her old self. Scrappile 1 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted April 2 Report Share Posted April 2 On 3/21/2024 at 8:21 AM, Scrappile said: I finally completed this project. I took me the longest of any project I have tried in my years of scrolling. Took two tries. I wanted to make a picture of a modern diesel train engine for my nephew-in-law that is a conductor. I could not find a pattern of one. Talking to @munzieb one time I mentioned it to him, he told to send him a picture of what you want and he would make a pattern. And he did, a real detailed pattern. A beautiful pattern.. I worked on it, gave up once, then decided to try again. I worked on this over a period of 4 or 5 months. Bernd Would call every once in a while to see how I was doing. I told him I was about to give up. I just could not scroll like I use to. He said he would give it a try. Two weeks latter he sends me his completed scrolled picture of it! So the challenge was thrown down. I had to quit whining and keep cutting. Finally got there. Many, many thanks to Bernd for the coaching and encouragement. Would never have finished it without it. I still have to frame it. The first picture is mine, the second is the one he cut and sent to me. His was even more difficult than mine, his was a little smaller. I seriously think I am going to give this one a try also. After seeing the fabulous work you two do.....not sure if I am going to post mine when I finish it, but I am going to finish it. Dick heppnerguy OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted April 3 Author Report Share Posted April 3 On 3/28/2024 at 10:44 AM, OCtoolguy said: You guys amaze me. Both of you are so talented. Beautiful job on cutting and pattern making. Did you use spirals on them? I've just bought a batch of blades to cut a peacock lamp that Bernd was kind enough to share his pattern with me. I hope to get going again once my wife is back to her old self. I only used spirals to increase the kerf of some lines after first cutting with a straight blade. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.