Charlie E Posted March 27 Report Share Posted March 27 Just curious if anyone else has worked with White Limba wood. I went to Woodcraft in Birmingham Alabama and they have a large bin of cut-offs that are $2 a pound. It had a lot of quarter sawn White Limba, which I'd never heard of. It looked great for portraits and I bought just over 60 pounds thinking I wouldn't have to buy any wood for a year. It's so hard I broke about 6 drill bits and a dozen blades on my first small project, plus I've been really sick with sinus and chest congestion for 5 days since I worked with it though I did wear a mask and run my dust collection. Planning to call today to see if they'll let me exchange the 60ish pounds I have left. OCtoolguy, barb.j.enders and ChelCass 3 Quote Link to comment Share on other sites More sharing options...
Bill WIlson Posted March 27 Report Share Posted March 27 Never worked with it, but here are a couple comments, cut & pasted from the Wood Database; Workability: Easy to work with both hand and machine tools. Contains a small amount of silica, but blunting effect on cutters is usually small. Glues and finishes well. Allergies/Toxicity: Although severe reactions are quite uncommon, limba has been reported to cause skin and respiratory irritation, as well hives, asthma-like symptoms, and bleeding of the nose and gums. Splinters also tend to become infected and take longer than usual to heal. See the articles Wood Allergies and Toxicity and Wood Dust Safety for more information. https://www.wood-database.com/limba/ OCtoolguy and Charlie E 1 1 Quote Link to comment Share on other sites More sharing options...
TAIrving Posted March 27 Report Share Posted March 27 I question what you really got. According to The Wood Database, white limba is a relatively light, soft wood and should be easy to work. On the other hand, it does carry the risk of respiratory infection. Limba | The Wood Database (Hardwood) (wood-database.com) OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
barb.j.enders Posted March 27 Report Share Posted March 27 1 minute ago, Bill WIlson said: Never worked with it, but here are a couple comments, cut & pasted from the Wood Database; Workability: Easy to work with both hand and machine tools. Contains a small amount of silica, but blunting effect on cutters is usually small. Glues and finishes well. Allergies/Toxicity: Although severe reactions are quite uncommon, limba has been reported to cause skin and respiratory irritation, as well hives, asthma-like symptoms, and bleeding of the nose and gums. Splinters also tend to become infected and take longer than usual to heal. See the articles Wood Allergies and Toxicity and Wood Dust Safety for more information. https://www.wood-database.com/limba/ You beat me to it. I was just going to do the same thing. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
ChelCass Posted March 27 Report Share Posted March 27 I have never heard of White Limba wood, sounds like some really bad wood. I googled the wood and it is from Africa. One site said it was a easy wood to work with....................Really?? So sorry to hear about Sinus issues, hope you can get them cleared up soon. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Charlie E Posted March 27 Author Report Share Posted March 27 @Bill WIlson @ChelCass @TAIrving @barb.j.enders Thanks for the responses. And it may well be that it isn't Limba because I had also seen that it isn't supposed to be that toxic or hard to work with. I lost count of how many drill bits I broke off. I hate when that happens. I nearly always end up hitting the bit and ruining a blade when I try to cut around it. It could be a coincidence that I got sick on that day. I'm still going to call today and see if they'll let me exchange it. barb.j.enders and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted March 27 Report Share Posted March 27 I use black Limba Appears to be the same, when turning and never had a problem with it. Charlie E and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
JTTHECLOCKMAN Posted March 27 Report Share Posted March 27 (edited) I have used both black and white and sometimes I think they mix the names. But never had a problem. I treat all woods as toxic and wear some sort of mask when cutting any woods. I also wear some sort of glasses to at least keep shards from getting in the eyes. Have to say of all the woods I have used over the years I never had an allergic reaction to using. It actually is a soft wood. Not sure why you are having problems drilling. Could you post a photo of the wood in question. https://www.wood-database.com/limba/ Edited March 27 by JTTHECLOCKMAN OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Charlie E Posted March 27 Author Report Share Posted March 27 30 minutes ago, JTTHECLOCKMAN said: I have used both black and white and sometimes I think they mix the names. But never had a problem. I treat all woods as toxic and wear some sort of mask when cutting any woods. I also wear some sort of glasses to at least keep shards from getting in the eyes. Have to say of all the woods I have used over the years I never had an allergic reaction to using. It actually is a soft wood. Not sure why you are having problems drilling. Could you post a photo of the wood in question. https://www.wood-database.com/limba/ Whatever it is, it is very heavy and hard as rock. I just spoke with Woodcraft and thankfully I can exchange it. barb.j.enders and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted March 27 Report Share Posted March 27 What a shame. That looks like some very nice wood. danny, Charlie E and barb.j.enders 3 Quote Link to comment Share on other sites More sharing options...
Charlie E Posted March 27 Author Report Share Posted March 27 47 minutes ago, OCtoolguy said: What a shame. That looks like some very nice wood. Yes, I really liked the looks of it. I traded it all in for 15 board feet of Alder. OCtoolguy and wombatie 2 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.