Popular Post Wichman Posted April 5 Popular Post Report Share Posted April 5 I took a break from the basket to make a gift for a friend. This is an example of why I like to use small blades, I get twofors. First picture is the fallout glued to a precut plaque (the gift). The second is the opening, this will become a gift for my granddaughter, I thinking of attaching a picture ( or pictures ) in the opening. If I do I'll post the results. ? Wood: 5/16" Elm, Blade: FD Polar #1 for the inside cut, #3 for the outside Time: about an hour of cutting. Pattern: found on a facebook group. Finishing, one coat BLO 50/50 with MS, The plaque will get 2 coats rattle can shellac. RabidAlien, wombatie, Charlie E and 10 others 13 Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted April 5 Report Share Posted April 5 Very well done and twofers at that. Not only small blades, but small entry hole as well. Wichman 1 Quote Link to comment Share on other sites More sharing options...
Wichman Posted April 5 Author Report Share Posted April 5 One more picture and a note. I use a #65 drill bit for the pilot holes (.035") I drilled them at the far upper right hand side at the tip of the wing and at the upper right hand where the two fingers meet, this is so I can "hide" the hole within the pattern. Finished piece, many light coats of rattle can shellac: barb.j.enders and danny 2 Quote Link to comment Share on other sites More sharing options...
rjweb Posted April 5 Report Share Posted April 5 Very nice, RJ Wichman 1 Quote Link to comment Share on other sites More sharing options...
Joe W. Posted April 6 Report Share Posted April 6 The shape of the wood, angle of the grain, and light edge on the right hand side really accentuate the dancer. Well Done! barb.j.enders and Wichman 1 1 Quote Link to comment Share on other sites More sharing options...
barb.j.enders Posted April 6 Report Share Posted April 6 Well done! Wichman 1 Quote Link to comment Share on other sites More sharing options...
MarieC Posted April 6 Report Share Posted April 6 Very nice! Wichman 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.