First actual scrolling project

[artmill]

This project was my first actual scrolling test, unfortunately I used Luan and it ended up with the ply falling out in areas . I had a problem with the luan sucking up the polyurathane spray. All in all it came out just ok . Thanks for looking

[DWSUDEKUM]

Nicely done. One of the ways to get around that is to use a drying oil such as Tung or Danish oil to seal the project and then just top coat with the other. Thanks for sharing it with us

 

DW

[artmill]

Thanks for the suggestion, I will try that....

[Jim Finn]

Most of what I know about woodworking I learned by trial and error. Keep trying different woods and finishes and you will find what works best for you.

[artmill]

Thanks Jim

[Marshall]

Looks good on this end , you may want to try some Walnut on this sometime ......you should make more -- well done ......

[wombatie]

Well done on your first project.

 

Marg

[Helenm2807]

Well done on getting the first one out of the way - that's always the hardest.

And you did a good job on it!

 

H.

[artmill]

Thanks guys, I have since started on new projects using different wood types. I went from the fryng pan into the fire so to speak, so I decided to make clocks for Christmas. I said to myself, this looks easy enough, boy was I wrong. I am now on the 4th one and it is getting easier (still difficult). Once I finish cutting them I will do the final finish on them and post them, until then, C-Ya..art

[realfEZ]

Great start. Brilliant future. Congrats.

[Gina]

great Job, on your first project, keep them comming, its funny that is the first pattern I cut when I started a little over 6 months ago and I have not stopped since. Gina

[amazingkevin]

Your doing great,I started out doing the lords prayer 16" x 24" and after i started i noticed that some letters would disappear off the project.But because of what the project was, i still kept at it .