btseed357 Posted August 17 Report Share Posted August 17 Hello everyone, I have been scrolling for about a year and wanted to get more involved with the hobby so I thought I would give the SSV a whirl. I have a Dewalt 788 and am considering an upgrade to the Pegas. All I read about the Pegas is so positive that I it comes across as the old “if it sounds too good to be true then it probably is”. Has anyone on here ever had to go back to Pegas about a problem? If so, how was the experience with customer support? Not trying to be a pessimist, but I would like to know the pros and cons of any product before I make the jump. Thanks, Bob Me and my buddy 1 Quote Link to comment Share on other sites More sharing options...
jerry walters Posted August 18 Report Share Posted August 18 Colorado welcomes you to the village Bob. You will get a lot of good advice from the folks here. I have been a member for almost three years and have received a lot of help. Many of us have a Pegas. I have had mine for 2 years and up to now have not had a problem. One of our members sells Pegas scroll saws. Also, a good number have the Dewalt 788. Enjoy your stay here. Like I said, you will receive a lot of help from the members. Jerry Me and my buddy and btseed357 1 1 Quote Link to comment Share on other sites More sharing options...
btseed357 Posted August 18 Author Report Share Posted August 18 Jerry, Thanks for your response. I will probably break down and order the Pegas some time this week. I do have a question. On the Dewalt, I use an aftermarket brace to keep the arm up, when I release the brace after threading the hole on my project, the arm will lower on its own, making fretwork simple. As I understand it, the Pegas arm is self holding and you have to pull it down after threading each hole. Does that make a project with a lot of fretwork more cumbersome? Thanks in advance. Bob Me and my buddy 1 Quote Link to comment Share on other sites More sharing options...
Jim McDonald Posted August 18 Report Share Posted August 18 I have owned the 788 and now a Pegas. When I had the 788, I seemed to top feed mostly and now on the Pegas, it is very largely bottom feed. Just seemed to be the way the saw guided me. I had installed Pegas clamps on the 788. I do like the arm hold on the Pegas. I had very little adjustment moving between the saws as far as operation. btseed357 1 Quote Link to comment Share on other sites More sharing options...
btseed357 Posted August 18 Author Report Share Posted August 18 Jim, Thanks for the response. If you don’t mind me asking, what were the biggest adjustments with the upgrade? Any regrets? Thanks, Bob Quote Link to comment Share on other sites More sharing options...
daveww1 Posted August 18 Report Share Posted August 18 welcome to the village, I have a Pegas but haven't been able to use it for over 2 years. I was taking care of my wife who was suffering from Alzheimer's. She just passed away in April and I had surgery for a tumor in my head at the same time. btseed357 1 Quote Link to comment Share on other sites More sharing options...
btseed357 Posted August 18 Author Report Share Posted August 18 Thanks for the response, I am so sorry for the sadness that you have been going through. What a rough time these past couple of years must have been. I hope that you will recover and get through this. Best of luck to you. Bob Quote Link to comment Share on other sites More sharing options...
Jim McDonald Posted August 19 Report Share Posted August 19 11 hours ago, btseed357 said: Jim, Thanks for the response. If you don’t mind me asking, what were the biggest adjustments with the upgrade? Any regrets? Thanks, Bob Just minor differences in blade tensioning, the mechanics of inserting blades etc. In a way, it was like learning the wiper and cruise controls on a different car. Unlearning one set of muscle memories and training new ones. btseed357 1 Quote Link to comment Share on other sites More sharing options...
wombatie Posted August 19 Report Share Posted August 19 Welcome to the Village Bob. I have a DeWalt and an Ex21, love them both equally. Always been a bottom feeder. Marg btseed357 1 Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted August 19 Report Share Posted August 19 Welcome to the Village forum from Tennessee. As a Pegas dealer, I may be able to help with any questions. Quote Link to comment Share on other sites More sharing options...
Blaughn Posted August 26 Report Share Posted August 26 On 8/18/2024 at 8:42 AM, daveww1 said: welcome to the village, I have a Pegas but haven't been able to use it for over 2 years. I was taking care of my wife who was suffering from Alzheimer's. She just passed away in April and I had surgery for a tumor in my head at the same time. Dave, I am so sorry this news. My prayers are with you as you navigate those terrible waters. Bruce Quote Link to comment Share on other sites More sharing options...
Scrappile Posted August 27 Report Share Posted August 27 Welcome to the village. If you go from a DeWalt to a Pegas, you will have no regrets. It is a pleasant step up from the DeWalt. I went from a DeWalt to an Excalibur (same type saw as the Pegas) It was a very rewarding transition for me. Quote Link to comment Share on other sites More sharing options...
btseed357 Posted August 28 Author Report Share Posted August 28 Thanks Scrapple, I finally decided to push the launch button on the upgrade. With Denny Knappen's help, I ordered the Pegas and hope to have delivered near the end of September. I am looking for to it and like you, I will not have any regrets. Scrappile and meflick 2 Quote Link to comment Share on other sites More sharing options...
meflick Posted August 30 Report Share Posted August 30 On 8/18/2024 at 9:42 AM, daveww1 said: welcome to the village, I have a Pegas but haven't been able to use it for over 2 years. I was taking care of my wife who was suffering from Alzheimer's. She just passed away in April and I had surgery for a tumor in my head at the same time. Dave, I wanted to say I’m sorry to hear of your loss of your wife in April from Alzheimer’s. I know a bit of the battle you had as my mom suffered from that same horrible disease. When she passed, 8 years ago now, is when I found solace in the scrollsaw. I’m sorry you had your issues compounded by having your own health issue with a tumor in your head. I pray that you are recovering well and can find some joy in using your saw. Bob, glad to hear you were able to get help from Denny in getting your Pegas saw ordered. Let us know how you like it when it arrives. Quote Link to comment Share on other sites More sharing options...
Ber Gueda Posted September 2 Report Share Posted September 2 Hi form Spain, Bob, I am another Pegas happy scroller. I think you won't regret the decission. btseed357 1 Quote Link to comment Share on other sites More sharing options...
Dan Posted September 19 Report Share Posted September 19 Welcome to the Village, Bob. btseed357 1 Quote Link to comment Share on other sites More sharing options...
Joe W. Posted September 20 Report Share Posted September 20 On 9/2/2024 at 12:15 PM, Ber Gueda said: I am another Pegas happy scroller. I think you won't regret the decission. Me Too! Welcome!! btseed357 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.