Jump to content

A few pics


red river

Recommended Posts

Very cool.  I've dipped my toe into using epoxy resin to add to my woodworking, but haven't tackled anything beyond a simple 1 color pour.

A few questions;

How do you prevent spill over from one section to another?

What did you use as a backer during the pour?

Did you paint the form prior to pouring the epoxy?

Link to comment
Share on other sites

hi Bill, in answer to your questions

spillover.........be very careful an fill about 3/4 to 7/8 full

backer.......i use Duck brand clear shelf liner and put my project wood down on the sticky side and use clamps to clamp wood to liner, this makes sure that there is no leakage on back side. this is important because if you're doing a sun catcher type project the backside needs to be blemish free . If you're not doing a sun catcher you can use a thin plywood backer to finished product and a little leakage would'nt really matter. ( the clear liner peels right off after epoxy has set.)

i paint my project before i add epoxy....

Link to comment
Share on other sites

8 hours ago, red river said:

hi Bill, in answer to your questions

spillover.........be very careful an fill about 3/4 to 7/8 full

backer.......i use Duck brand clear shelf liner and put my project wood down on the sticky side and use clamps to clamp wood to liner, this makes sure that there is no leakage on back side. this is important because if you're doing a sun catcher type project the backside needs to be blemish free . If you're not doing a sun catcher you can use a thin plywood backer to finished product and a little leakage would'nt really matter. ( the clear liner peels right off after epoxy has set.)

i paint my project before i add epoxy....

Been wanting to try epoxy out, myself.  Thanks for answering most of my questions!!!  One more, though...is there a way to reliably figure out how much epoxy you need for a project/color, or is it mostly experience and eyeballing it?  My fear is running short and not mixing up the same color on a second batch, or mixing too much and wasting or having to dispose of excess epoxy.

Link to comment
Share on other sites

I do not know if I ever will try epoxy but I can see why others like yourself love it.  You explanation with using it should be quite helpful for those that haven't given it much of a go.  Nice project and appreciative that you share your knowledge with others here. That is a big part of what THE VILLAGE is all about.

 Dick

heppnerguy

Link to comment
Share on other sites

just one last note......for RabidAlien....I always err on the side of making to much epoxy mix for the reason you mentioned ( two batches made may not come out the same color ) A pic to show how i clamp up, a pic to show a mistake if you don't clamp up right. that gnome will have a black backer. a pic to show gnome beard after pour. If someone can show me a better way to hold down project , then pour and for resin not to leak into other areas please let me know. i keep thinking there has got to be a better way. thanx..forrestclamp.thumb.jpg.b390b12c1fd8576107334c0fd2827ace.jpgmistake.thumb.jpg.187e304cc6c755badea9abf818f62668.jpgthursday1.thumb.jpg.3dd0e00b0217cc0fa49150c65675e6d2.jpg

Link to comment
Share on other sites

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...