Popular Post don in brooklin on Posted October 12 Popular Post Report Share Posted October 12 I preparation for a class I am doing on Compound cutting I modified Steve Good bird house by adding a stand. I also modified so I that you have don't have to trap after cutting the first side. (see picture below for another sample) Cut with poplar. Bird unknown. barb.j.enders, wombatie, Scrappile and 8 others 11 Quote Link to comment Share on other sites More sharing options...
rafairchild2 Posted October 12 Report Share Posted October 12 (edited) I would love to see more of how you do this. What do you mean by "trap"? I assume you cut drill hole to drill hole, then remove and flip, this keeps all pieces together. DO the same on the other side, then cut the bottom off. Edited October 12 by rafairchild2 Quote Link to comment Share on other sites More sharing options...
don in brooklin on Posted October 12 Author Report Share Posted October 12 Just now, rafairchild2 said: I would love to see more of how you do this. What do you mean by "trap"? When you normally do compound cutting you cut the first side and then you "trap" the floating piece by wrapping in clear tape or by rotating in the clamps you have done. This method is - you start in the bottom hole and cut the pattern and end up in the other hole. You now turn the piece to other side and do the same thing. There is now need to wrap or trap. Once both sides are cut you cut the straight line above the holes and birdhouse falls out. NOTE: This only works for something that has a flat bottom like the standing birdhouse and like chess pieces. The photo above was for a chess piece. I will post pattern but I want to get Steve's blessing. jollyred 1 Quote Link to comment Share on other sites More sharing options...
Dave Monk Posted October 12 Report Share Posted October 12 That's a great idea. The only thing I don't like is that you have to start with thicker stock. Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted October 14 Report Share Posted October 14 I purchased a set from Scroller Online. Quote Link to comment Share on other sites More sharing options...
don in brooklin on Posted October 14 Author Report Share Posted October 14 10 minutes ago, Denny Knappen said: I purchased a set from Scroller Online. Denny. I have the pattens too that I bought from Dianna when she still had a web site. Scroller is difficult to deal with as a Canadian as pattens are not downloadable. I don't use any patterns in my classes that are not in the "Free" world so with the standing birdhouse I modified Steve's. barb.j.enders 1 Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted October 15 Report Share Posted October 15 19 hours ago, don in brooklin on said: Denny. I have the pattens too that I bought from Dianna when she still had a web site. Scroller is difficult to deal with as a Canadian as pattens are not downloadable. I don't use any patterns in my classes that are not in the "Free" world so with the standing birdhouse I modified Steve's. I fully understand. BadBob 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.