Popular Post TAIrving Posted November 5 Popular Post Report Share Posted November 5 When you just finished what you were working on, it is too late to start on another project and too early to stop for the day. Norm Fengstad, wombatie, Wichman and 7 others 9 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted November 5 Report Share Posted November 5 1 hour ago, TAIrving said: When you just finished what you were working on, it is too late to start on another project and too early to stop for the day. Start another project. It's never too late. TAIrving and barb.j.enders 2 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted November 5 Report Share Posted November 5 Clean up the saw wax the table and oil the oiling points on it or other equipment. I like to do saw maintenance at the ending of a day so the oil has time to trickle down into the bearings etc. That of course depends on the saw too.. as some don't really have anyplace to oil etc. Sometimes I'll start prepping the next project like sorting / selecting the board and pre-sand it etc. In my shop there is always something to do or needs to be done so I don't have too much problems with "what to do" more like what's most important to do now and what can wait a day or two, LOL OCtoolguy, danny, MarieC and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted November 5 Report Share Posted November 5 If my wife read this, she you say, "Clean up the shop!" kmmcrafts, OCtoolguy, Dan and 1 other 4 Quote Link to comment Share on other sites More sharing options...
JTTHECLOCKMAN Posted November 5 Report Share Posted November 5 (edited) Never ran into that problem. Always something to do in the shop. I am not one for maintenance so that is out. Never touched my scrollsaw for maintenance in my life time. I have run those saws plenty of hours over the years. If you call vac the dust up then yes that is what I do. I do have alot of home projects still going on. Come this winter I will get back into making pens. Love that. Scrollsaw days are just about nonexistent any more. Edited November 5 by JTTHECLOCKMAN OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Norm Fengstad Posted November 6 Report Share Posted November 6 Very nice as well as using the cut off pieces that are to good to throw away OCtoolguy and danny 2 Quote Link to comment Share on other sites More sharing options...
flarud Posted November 7 Report Share Posted November 7 I'm 54 and have been enjoying naps more and more the last few years! OCtoolguy and barb.j.enders 1 1 Quote Link to comment Share on other sites More sharing options...
wombatie Posted November 8 Report Share Posted November 8 Good way to spend the time. Now clean up the shop. Marg OCtoolguy, barb.j.enders and TAIrving 1 1 1 Quote Link to comment Share on other sites More sharing options...
Roberta Moreton Posted November 9 Report Share Posted November 9 I usually clean before I begin for the day. I will look for the next shiny project when I finish. OCtoolguy and barb.j.enders 2 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.