Hudson River Rick Posted November 7 Report Share Posted November 7 I saw this LED on Pintrest and I tried to find it using google & Amazon, there was no information on the supplier or the price. I think this would be a great light to use in a Nativity scene that I am cutting for my niece. In my search on the internet, I found a gazillion other lights,but not one like this, has anyone seen this. Thanks for your help Rick OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
JTTHECLOCKMAN Posted November 8 Report Share Posted November 8 That could be someone's homemade version. Easy to do with the right parts and a little knowledge. Just get one of the others making sure you have what you want. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
rash_powder Posted November 11 Report Share Posted November 11 If I remember correctly, a website called Kaidomain sells LED parts. Mostly flashlight stuff, but that would work with the right power pack. Maybe a take a look there. Something may be there. Also, I think Banggood sells some LED parts too. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Jim McDonald Posted November 11 Report Share Posted November 11 Looking at that board, the solder joints are definitely either flow joints or hot paste--commercial stuff. In a past job, I made thousands of hand soldered joints and the consistency of those joints tell me it came from a factory. the chip makes me wonder if the light blinks or runs through a dimming pattern. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Hudson River Rick Posted November 11 Author Report Share Posted November 11 @rash_powderThank you for the heads up, I will search it out. Rick OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Hudson River Rick Posted November 11 Author Report Share Posted November 11 @Jim McDonald Thank you Jim. In a previous life(?), I,worked for IBM and I also did more soldering than I liked, so I agree that the solder joints are proably float or solder bath joints. Also, you have a great eye, the project that I saw on the net that uses this LED setup, is in a nite light and it can be dimmed. I have been searching for almost a week,and today I am officially done, I willmove on to a different direction Rick OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
rash_powder Posted November 12 Report Share Posted November 12 An LED of whatever color you like, a resistor, small switch, and a 2032 battery are all that is really needed to build a light. A bit of hot glue to hold things in place and your done. Digikey carries all kinds of stuff like that, and generally gets things out quite quickly. OCtoolguy and Jim McDonald 1 1 Quote Link to comment Share on other sites More sharing options...
Hudson River Rick Posted November 12 Author Report Share Posted November 12 @rash_powder THANK YOU !!! Rick OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted November 12 Report Share Posted November 12 speaking of LED lighting, I love to build the Schwinbogens (lighted Christmas arches). The strings of lights that are available are normally longer than I want. Can one shorten them somehow? I learned my Master's in electronics in the Marine Corps, so I am pretty dumb about this stuff. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
rash_powder Posted Monday at 05:21 PM Report Share Posted Monday at 05:21 PM On 11/12/2024 at 12:21 PM, Scrappile said: speaking of LED lighting, I love to build the Schwinbogens (lighted Christmas arches). The strings of lights that are available are normally longer than I want. Can one shorten them somehow? I learned my Master's in electronics in the Marine Corps, so I am pretty dumb about this stuff. I haven't used or looked to closely at the little LED light strings. If they are wired in parallel, then just nip the un-needed off and tape the ends. Do this powered off, of course. The driver may not like to see a short. OCtoolguy and Scrappile 1 1 Quote Link to comment Share on other sites More sharing options...
Hudson River Rick Posted Monday at 10:50 PM Author Report Share Posted Monday at 10:50 PM @rash_powder You are correct, I have cut LED light strip tape to the length that I needed when working on other scroll saw projects. The LED light that I am would like to purchase I saw as part of an advertisement for a Laser cut puzzl project, it is complete with a tiny circuit board that has some controls for the LED, The problem is that I can't read the numbers on the board, or I would try hunting it down using that information. Thank you for your assistance. I have just about given up the search and will move on to other projects. Rick OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.