JTTHECLOCKMAN Posted November 18 Report Share Posted November 18 5 minutes ago, KenofShelby said: Country Dairy always comes out with Peppermint Stick’ ice cream for Christmas….Real Peppermint sticks broken up in the ice cream…And the sticks are grown in local orchards…. Now that sounds great. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
joel brinker Posted November 18 Report Share Posted November 18 the first scroll saw i bought was from harbor freight, it broke in the first week. then i bought a wen, it made me want to keep scroll sawing. either one you need to get the adapter for pinless blades. I was going to buy a dewalt and the price went way up, saw that i could get a remanufactured excalibur or King 21" from amazon for about the same price. I'm so glade i did, 3yrs and the only thing i changed was the blade holders. bought the cheaper ones first then got the pegas, it knocked the vibration to less then half, i dont know about any other saws kmmcrafts and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
Me and my buddy Posted November 19 Report Share Posted November 19 I'm kind of new too but I will say, my wen works great! mine is a 16' so not big but gets the job done OCtoolguy and kmmcrafts 2 Quote Link to comment Share on other sites More sharing options...
KenofShelby Posted November 20 Author Report Share Posted November 20 Morning, All. I’m still trying to connect with the guy that has the Seyco for sale. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted November 20 Report Share Posted November 20 I have to say proceed with caution. I saw an unbelievable deal on an almost-new Hawk a while back. There was not much info, just pictures and video. I started asking questions because I was excited. Asked two questions via message, then asked if he would send the serial number so I could check on the age of the saw. The guy exploded and cussed me out for asking the questions; Then I noticed that by the end of that day, the listing was gone. He may have sold it, but I felt like maybe it was a stolen saw, and he was afraid I was on to it. Could be wrong, but his action just set off alarms in my head. ChelCass and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
Mabel H. Posted November 20 Report Share Posted November 20 I have a delta which is as far as I can see is the same as dewalt only cheaper. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Roberta Moreton Posted November 26 Report Share Posted November 26 (edited) I have a Dewalt and a Delta. They are the same saws. The Dewalt is my favorite type of saw. Edited November 26 by Roberta Moreton OCtoolguy and kmmcrafts 2 Quote Link to comment Share on other sites More sharing options...
KenofShelby Posted Thursday at 02:46 AM Author Report Share Posted Thursday at 02:46 AM Very happy with my Bauer,, does everything I can think of.. Guess you pros will need to tell me what I am missing,,,Love that the table stays level and the arm tilts. I am looking for clock patterns, when I am ready, \Have been looking at all the videos that are out there, So far I am learning more from the two different ladies that have made videos…They are very informative for a newbie and very logical which I appreciate. ChelCass, JTTHECLOCKMAN and kmmcrafts 2 1 Quote Link to comment Share on other sites More sharing options...
ChelCass Posted Thursday at 01:40 PM Report Share Posted Thursday at 01:40 PM Ken for clock patterns check out our pattern library under Utilitarian. Several to choose from, also check Steve Good's site he has several patterns as well. Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted Thursday at 01:50 PM Report Share Posted Thursday at 01:50 PM Glad it's going well for you and you're happy with the Bauer... Good to hear of those that have bought them to have been happy with their purchase. Not knowing what type of clock pattern you mean? Wall hang clock, desk clock, victorian fretwork style clocks etc.. there are a lot of different patterns for clocks.. I'm sure there is probably some right her on this site in the pattern section.. Also look up Steve Good.. he has quite a few clock patterns. Sheila Landry, Sey Mey scrollsawartist, There are also many clock pattern books out there. Since you're in Michigan if you're ever near Charlotte check out LLJohnson lumber.. They have a wide selection of different lumber and plywood.. they sell tools and have a library of the scroll saw books and many other woodworking books of all kinds. What ladies you watching? I assume on YouTube? There is a lot of good videos out there to watch.. some better than others but I almost always learn something from them.. even after scrolling for years there is someone doing something a different or easier way.. Quote Link to comment Share on other sites More sharing options...
JTTHECLOCKMAN Posted Thursday at 04:04 PM Report Share Posted Thursday at 04:04 PM Glad you like the saw and the more you use it you will get to understand the workings and little tricks you can do to help things along more. Good luck. As far as clock patterns, yes check this site, and Steve Goods site for free patterns to get your feet wet. When you get more specific reach out and maybe we can steer you in the direction. Clocks are always fun. There are so many variety of clock to be made so you will have to decide which way you want to go. Using clock inserts is always the easiest way. But will say you are now adding an expense to the project so keep that in mind. Some clock works are better than others but you can get lemons in all. Good luck and welcome to my world. JTTHECLOCKMAN Quote Link to comment Share on other sites More sharing options...
KenofShelby Posted yesterday at 12:48 AM Author Report Share Posted yesterday at 12:48 AM Looking for a clock plan something like this. I see plenty of plans out there, just have to decide which II want. Quote Link to comment Share on other sites More sharing options...
JTTHECLOCKMAN Posted yesterday at 02:11 AM Report Share Posted yesterday at 02:11 AM I will tell you this, that most those clocks are cut with a CNC machine. To get accurate cuts with a scrollsaw is a huge task. The gears need precision in the teeth. Can it be done ye it has been but you are tweaking all the time(No pun intended) Good luck. Quote Link to comment Share on other sites More sharing options...
Wichman Posted yesterday at 05:19 AM Report Share Posted yesterday at 05:19 AM A word of warning: One of this type of clock was featured in scroll saw woodworking and crafts; spring 2007 issue 26. The plans in the magazine are missing some information, that information is available at Http://wooden-clockworks.com/ The website is supposed to have additional patterns but very little works on the website, possibly because I'm using my phone. Quote Link to comment Share on other sites More sharing options...
Bill WIlson Posted 22 hours ago Report Share Posted 22 hours ago 15 hours ago, JTTHECLOCKMAN said: I will tell you this, that most those clocks are cut with a CNC machine. To get accurate cuts with a scrollsaw is a huge task. The gears need precision in the teeth. Can it be done ye it has been but you are tweaking all the time(No pun intended) Good luck. I'll second this. I knew a master scroller who made some of these wooden gear clocks. He was also a mechanical engineer, so he had a fundamental understanding of the challenges involved. He said his biggest problem, apart from the precision required, was that the slightest change in humidity would mess up the movement and his clocks never kept good time. This can be mitigated somewhat by using plywood, but the tolerances are so tight that even using BB ply, there can be enough movement with humidity to mess things up. These are great examples of a scroller's skills and an excellent conversation piece, but if you intend for it to actually be functional & accurate clock, well, good luck. OCtoolguy, BadBob and JTTHECLOCKMAN 2 1 Quote Link to comment Share on other sites More sharing options...
BadBob Posted 3 hours ago Report Share Posted 3 hours ago 18 hours ago, Bill WIlson said: I'll second this. I knew a master scroller who made some of these wooden gear clocks. He was also a mechanical engineer, so he had a fundamental understanding of the challenges involved. He said his biggest problem, apart from the precision required, was that the slightest change in humidity would mess up the movement and his clocks never kept good time. This can be mitigated somewhat by using plywood, but the tolerances are so tight that even using BB ply, there can be enough movement with humidity to mess things up. These are great examples of a scroller's skills and an excellent conversation piece, but if you intend for it to actually be functional & accurate clock, well, good luck. 100% agree. I thought about this the first time I saw one of these. The history of the struggle to get accurate clocks is an interesting read. Quote Link to comment Share on other sites More sharing options...
KenofShelby Posted 35 minutes ago Author Report Share Posted 35 minutes ago How did they make them before CNC? I know of one wooden clock, irl, that is over 50 years old…Maybe needs adjustment once a month or less. I am going to take pictures and measurements and copy that clock. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.