Tim Stanford Posted December 10 Report Share Posted December 10 Too much info on which SS blade to use. I know everyone has the "go to" blade and I am frustrated just trying out this and that blade . I know all good things take time but does anyone have a good written reference or web site that gets down to the nuts and bolts of different companies and their blades. I currently use suggestions from Bob's Home Workshop on YouTube Thanks in advance! Tim OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Wichman Posted December 10 Report Share Posted December 10 Google "scroll saw blade selection chart" All the major brands are there. It's a good starting point. FYI I disagree with the charts, but they are a starting point. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted December 10 Report Share Posted December 10 Scrollsaw.com has a ton of info on many different subjects around scroll saws. Tim Stanford 1 Quote Link to comment Share on other sites More sharing options...
JTTHECLOCKMAN Posted December 10 Report Share Posted December 10 Each blade company has a chart that helps with selections. But in the end it still comes down to your style of scrolling, woods and materials you are scrolling, and just how fast or push your blades all count. No one shoe size fits all. Brand of blades adds to the equation. Sorry but just the way it is. Scrappile, barb.j.enders, Tim Stanford and 2 others 4 1 Quote Link to comment Share on other sites More sharing options...
Peter N White Posted December 10 Report Share Posted December 10 Acutabove woodworking has a great article on scrolling and what blades to use.A lot of good info. Roberta Moreton, barb.j.enders and OCtoolguy 3 Quote Link to comment Share on other sites More sharing options...
Fab4 Posted December 10 Report Share Posted December 10 Hi Tim: All good info above JT said it best They do sell sample packs for blades, for me that was good start It's a pain going through trial and error but in the end well worth it Be patient when if comes to blade selection and you will get what you want/need in the end. KEEP IT FUN, it's a great hobby Fab4 OCtoolguy, Tim Stanford and JTTHECLOCKMAN 3 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted December 10 Report Share Posted December 10 The best book is right here.. you come to the right place. Most books are written based off one person's interview or opinion.. Here you ask the question of which blade to use you'll get 40 different answers to choose from based on each person's sawing style and the projects they make. We can leave you way more confused than you were before.. I bet if you ask a blade seller what the most popular sold blade size and style is that could be a good start for a newbie.. I know I have about 50 different blade styles and sized in my shop but I mainly only use two different sizes of the same style for most all the projects I throw at my saw.. I would bet many others are the same way.. As has been mentioned.. sample packs is really the best place to start and then follow up with questions here when needed.. barb.j.enders, Tim Stanford and OCtoolguy 3 Quote Link to comment Share on other sites More sharing options...
BadBob Posted December 10 Report Share Posted December 10 It is a personal preference more than anything else. Sometimes, the project will dictate the size of the blade to use. For example, when you cut puzzles, it's a balancing act. Cutting with a larger blade may make the puzzle too loose, while cutting with a very small blade may make it too tight, so kids can't easily fit the pieces together. barb.j.enders, Tim Stanford and OCtoolguy 3 Quote Link to comment Share on other sites More sharing options...
rustynail Posted December 10 Report Share Posted December 10 (edited) https://www.bearwood.com/media/Pegas-Scroll-Saw-Blade-Selection-Chart-Bear-Woods-Supply.pdf?srsltid=AfmBOooapeSvYHER7CPt3AonTFS1PyIpYKQWQ9IKzojirsq2bNzJsLPb Here is a chart I get all mine from Denny Knappen here on the site as he has great service and help when needed if looking for blades and good prices. Edited December 10 by rustynail OCtoolguy and Tim Stanford 1 1 Quote Link to comment Share on other sites More sharing options...
rash_powder Posted December 10 Report Share Posted December 10 Get some pieces of your most commonly used materials. Maybe scraps, or small bits to make small projects from; regardless your going to be experimenting. Then get a sampler blade pack with many sizes or tooth configurations; or just buy a several packs of blades you think may be right. Cut something; but the same something with diff blades until you find what you like. I did this on the fly with projects and blades. Personally I've settled on Olson Mach Speed #3 for 1/4" materials, maybe even stacked. A five is a bit better for stacked. I think Denny has some multi-blade packs to get a good assortment to experiment with. Good Luck! Tim Stanford and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted December 10 Report Share Posted December 10 Pegas has a Scroll Saw Blade Selection Chart. I have PDFs of the chart. Send me a message. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
JimNC Posted December 11 Report Share Posted December 11 Denny Knappen is the go to guy for blade advice. He has helped me out several times. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
JimNC Posted December 11 Report Share Posted December 11 17 hours ago, Denny Knappen said: Pegas has a Scroll Saw Blade Selection Chart. I have PDFs of the chart. Send me a message. Danny please send me a chart. Thank you. cjwoodart@gmail.com OCtoolguy and Tim Stanford 2 Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted December 11 Report Share Posted December 11 4 hours ago, JimNC said: Danny please send me a chart. Thank you. cjwoodart@gmail.com This is embarrassing. I thought I had a PFD file, but I can't find it. I will make a copy tonight. Tim Stanford and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
Tim Stanford Posted December 11 Author Report Share Posted December 11 On 12/10/2024 at 11:42 AM, rash_powder said: Get some pieces of your most commonly used materials. Maybe scraps, or small bits to make small projects from; regardless your going to be experimenting. Then get a sampler blade pack with many sizes or tooth configurations; or just buy a several packs of blades you think may be right. Cut something; but the same something with diff blades until you find what you like. I did this on the fly with projects and blades. Personally I've settled on Olson Mach Speed #3 for 1/4" materials, maybe even stacked. A five is a bit better for stacked. I think Denny has some multi-blade packs to get a good assortment to experiment with. Good Luck! Great idea! Gives me somewhere to I can really see and feel each blade type. I like action answers like yours. Thanks again OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Tim Stanford Posted December 11 Author Report Share Posted December 11 6 hours ago, Denny Knappen said: This is embarrassing. I thought I had a PFD file, but I can't find it. I will make a copy tonight. I've forgotten where I parked the car so a pdf is easy. Looking forward to it OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Tim Stanford Posted December 11 Author Report Share Posted December 11 On 12/9/2024 at 7:22 PM, OCtoolguy said: Scrollsaw.com has a ton of info on many different subjects around scroll saws. Octoolguy. Is OC for Orange County Ca? OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted December 11 Report Share Posted December 11 20 minutes ago, Tim Stanford said: Octoolguy. Is OC for Orange County Ca? Yes, I sold tools in Orange County for the better part of 40 years. Quote Link to comment Share on other sites More sharing options...
ScrollerGuy Posted December 12 Report Share Posted December 12 Here is one of the blade charts. Lots of information, but ignore the prices. The pdf will hopefully be attached to this post SS_BLADE_CHART_2-22-2013.pdf OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
don in brooklin on Posted December 12 Report Share Posted December 12 This is from Steve Good. I use this in my scrolling classes but modify to say that I personally use Flying Dutchman Ultra Reverse 90% of the time. Steve used to use FD but now uses Pegas MGT. Choosing a Scroll Saw Blade for a Project Many of my emails from readers ask about choosing a scroll saw blade for a particular wood. I am probably the wrong person to ask because I rarely choose a blade for the wood. I choose the blade based on the pattern. If I am cutting 3/4" thick hardwood but the pattern has very small interior cuts I use a #3 or whatever blade I need to get into the small interior holes. It will cut slowly but it will make the cut. When you see people talking about using a #9 blade to cut thicker/harder wood or a #3 for thinner/softer wood, they are talking about the efficiency of the cut. A #9 blade will cut thicker harder wood faster and break fewer blades but if the #9 blade won't allow you to get into the interior hole or make the tight turns then it does not work. As a scroller, I rarely care about the efficiency of the cut. I care about making accurate cuts even if they are slow. 95% of the time I use a #5 scroll reverse or a #3 scroll reverse. Occasionally if I have a rough cut to make I will grab a larger blade. I own just about every blade made and many of them rarely get used unless I run into a special project. I use spiral blades for portrait-style patterns or when a cut it too large to make the turn on the saw. Some materials require special blades. Metal and Corian are two that come to mind. Another similar question is about setting the speed on a variable-speed scroll saw. When I get a new saw I determine the maximum speed that the saw cuts without too much vibration. This is often just slightly below full speed. I run at that maximum speed unless I am cutting very thin wood. 1/8" or thinner. The thin wood gives little resistance to the blade and it is easy to make miscuts. If that is what I am cutting I do one of two things. I slow the speed of the saw down or if possible I stack cut to add resistance. None of the above advice is an unbreakable rule. Saws are different, people get a different feel from the cuts, and blades are different. My best advice to a new scroller is to try different techniques and use what feels best to you. Tim Stanford, ScrollerGuy, BadBob and 1 other 3 1 Quote Link to comment Share on other sites More sharing options...
BadBob Posted December 12 Report Share Posted December 12 Steve Good so closely matches what I do that I saved this blog post. I should have posted this. Tim Stanford and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
Norm Fengstad Posted December 12 Report Share Posted December 12 after many headaches trying to figure out scroll saw blades . I only use Pegas Modified geometry and Niqua ultra reverse in various sizes to #5. Pegas can be a bit fast or as some say aggressive but is a longer lasting blade with less burning and lowering speed it works very well. The ultra reverse is very smooth and easy to use. It is sold by many suppliers under different logos. I buy my blades from Sawbird as he is local supplier, Denny Knappen also is tops in supply of Pegas and I am sure he would answer many of your questions OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted December 12 Report Share Posted December 12 On 12/11/2024 at 7:06 AM, JimNC said: Danny please send me a chart. Thank you. cjwoodart@gmail.com PDF files sent. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Tim Stanford Posted Tuesday at 01:03 PM Author Report Share Posted Tuesday at 01:03 PM On 12/11/2024 at 5:42 PM, OCtoolguy said: Yes, I sold tools in Orange County for the better part of 40 years. I just thought so. I worked for OCSD for 31 years. Sure do miss the beach and sea. We are in Texas now. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Tim Stanford Posted Tuesday at 01:10 PM Author Report Share Posted Tuesday at 01:10 PM Thanks everyone for your thoughts and experiences! OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.