Popular Post Allen levine Posted April 5 Popular Post Report Posted April 5 Practicing my unsteady hands used a 2/0 fd blade for 1/4 inch and broke or bent 3 blades i used a 9 blade for 1/2 inch pieces base and stem all pieces again came out of bins i know the pattern uses the same species for stem since it's part of tail but I used what looks like white oak or ash and sapele scraps for fish inhave a boatload of poplar from all the other projects so made the grass with that took me approx 3 hours to cut and sand Used some old stain and I routed a small curve around base im still struggling with tight turns even with 2/0 blade i ended up using a 3 blade to finish the 1/4 inch pieces much easier for me TAIrving, Dak0ta52, OCtoolguy and 8 others 10 1 Quote
Allen levine Posted April 5 Author Report Posted April 5 I need to clean up some fuzzies on the green painted part will wait for a complete cure then wipe them off OCtoolguy 1 Quote
rjweb Posted April 5 Report Posted April 5 Allen, you have done a great job on that, RJ Allen levine and OCtoolguy 2 Quote
Scrappile Posted April 6 Report Posted April 6 HOLLY MOLLY, Allen You are really moving right along. That is a great piece of scrolling and finishing! Allen levine and OCtoolguy 2 Quote
Peter N White Posted April 6 Report Posted April 6 Nothing wrong with what you are doing looks good. OCtoolguy and Allen levine 2 Quote
OCtoolguy Posted April 6 Report Posted April 6 Fantastic work. Can't wait to see what comes next. Allen levine 1 Quote
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.