Docupton Posted January 11, 2013 Report Share Posted January 11, 2013 I printed a bird picture from my printmaster gold program and used it as a pattern, I cut 3 bird shapes, 2x 3mm and 1x 8mm from scrap wood. I drilled a large hole straight through the lower body of the 8mm, and a smaller hole roughly where the legs would be through to the larger hole. All 3 pieces were then glued together with the 8mm in the middle and then painted. Drive a nail into a fence post or tree and insert the head of the nail into the small hole until it enters the large hole. Hey presto a garden bird/ornament. Use any shape bird you like and I'm sure you will do a better job than me, especially with a paint brush. Quote Link to comment Share on other sites More sharing options...
DWSUDEKUM Posted January 11, 2013 Report Share Posted January 11, 2013 Nicely done. Thanks for sharing this with us. DW Quote Link to comment Share on other sites More sharing options...
wombatie Posted January 16, 2013 Report Share Posted January 16, 2013 I think you did a great job, well done. Marg Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted February 13, 2013 Report Share Posted February 13, 2013 Now here's a bird of a feather thats alltogether in color ,likeness,and scrolled to perfection.bird watchers would drool to see this beauty thru the binoculars.These and varietys of others will bring the outdoors right home and will say home,lol Nice work sir! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.