Stogies Posted May 21, 2014 Author Report Posted May 21, 2014 got scroll saw set up.......... here is some more pics of shop.....got wall plugs and lights hoked up................got exhaust fan hooked up..........going to run 100 amp service soon....it only has about 30amp size wire run out there..... its coming along..... Doug and Travis 2 Quote
Doug Posted May 21, 2014 Report Posted May 21, 2014 (edited) Duane It looks awesome. Wish I had that much room. I put my EX21 on 3/4 ply with 4 inch locking swivel casters and then put 3/4 ply with the same footprint as the base between the top of the stand and the saw so I could keep most frequently used scroll items - blades, etc - handy. For me it works well. Just went back through the thread and see I already said this - thought it sounded familiar. On well, old man, bad memory. Duane - I added the above pictures if a visual helps at all. I did have a new table top done by a machinest friend and it is two four inches wider and 4 inches longer in the front. For me, the larger table top is a joy. Edited May 21, 2014 by Doug Stogies 1 Quote
heppnerguy Posted May 22, 2014 Report Posted May 22, 2014 great job on your shop...the lights look very satisfactory.. The only thing I don't like about it is, it is way too organized..I have no talent in that category, myself. wish you were my neighbor so I could get my shop shaped up. Dick heppnerguy Quote
Multifasited Posted May 22, 2014 Report Posted May 22, 2014 Now to worry Dick time has a way of taking care of that .Love your elec and conduit .super if need arises to add branch offs later . great start 6 mos. will tell you better how you will deciced to use ,and your ready !!great job !! Quote
amazingkevin Posted May 23, 2014 Report Posted May 23, 2014 Beautifully laid out shop.If i had the room i'd love a revolving table so I wouldn't have to get up for each little process of doing a project.drill press ,belt sander,band saw,vacuum cleaner for dedusting projects,glueing station,etc,etc,all self enclosed so when you work the whole table is being dusted evacuated constantly..It wouldn't have to be too tall for the mini electric tools being used,just a thought.getting up and down is very painful for me . Quote
Stogies Posted May 23, 2014 Author Report Posted May 23, 2014 I am sure it wont always be that organized.....lol I have to run 100 amp service out there here in the next few weeks.......picking up some free wood Saturday, I mean lots of plywood oak, ash, birch and black walnut and maple pieces .............I dont know where I am going to put all of it.....owe the problems to have.....lol Quote
Multifasited Posted May 23, 2014 Report Posted May 23, 2014 If it is large pcs. maye be a wall stand up rack will help ,sure says a lot of room adjustable flip retainer works well while keeping ply straght and true sitting on a spacer board to keep moisture from climbing .Just a thought ,love mine .although supply dwindling. Quote
bobscroll Posted May 24, 2014 Report Posted May 24, 2014 You have a great shop there, You lucky man! Thanks for showing, Bob Stogies 1 Quote
gator Posted June 3, 2014 Report Posted June 3, 2014 well spent 3 days cleaning top to bottom. this summer i am planning to take sheet rock down and put plywood up and then install a vacuum system. need to do this bad i hate dust Travis and Stogies 2 Quote
Fish Posted June 3, 2014 Report Posted June 3, 2014 Boy, I'd settle just for a smooth concrete floor in my shop/garage. Quote
LarryEA Posted June 3, 2014 Report Posted June 3, 2014 The one problem I see is that it is too nice to use. But I would like to see you dirty it up. Stogies 1 Quote
Stogies Posted June 6, 2014 Author Report Posted June 6, 2014 heres my schroll saw stand now....thanks to someone here i seen pics of their saw.........here is my shop with the lean too I just added......maybe someday soon I will start making sawdust....... Travis 1 Quote
Phantom Scroller Posted June 6, 2014 Report Posted June 6, 2014 You must be very pleased with your work on this shop looks very well set up and loads of space and great lighting,wish I had a shop that big. I would have to move house as my garden takes over all the ground. thanks for all the pics and showing the progress always nice to see. Roly Stogies 1 Quote
Stogies Posted June 17, 2014 Author Report Posted June 17, 2014 Ok i am making sawdust .....i made this to hold 7 of these bins....I had 4 i am getting 3 more........they were stacked on top of each other so when you wanted one you had to move the other ones, now i can get the one I want without moving them.........so I had to post pics....I know how we like our pictures here........ Quote
Nick@tinkers-cove Posted June 17, 2014 Report Posted June 17, 2014 I promise I'm not being lazy, but....I posted my shop pics this morning. http://tinkers-cove.blogspot.com Your all welcome to subscribe if you wish. Kindest Regards & thanks for looking, Nick. Quote
grampa Posted June 17, 2014 Report Posted June 17, 2014 (edited) Duane, Your doing some good work there, Looking very strong that shop you have there, My little shed is only a quarter inch shiplap, 8'x6', Just a bit jealous! lol, Thanks for the photo's, Bob 6x8 that's a castle compared to mine Bob Edited June 17, 2014 by grampa Nick@tinkers-cove 1 Quote
Multifasited Posted June 22, 2014 Report Posted June 22, 2014 Hows the neighbors with the noise seem like they are close ? Quote
Stogies Posted June 25, 2014 Author Report Posted June 25, 2014 Havnt had any problems with neighbors yet....thank goodness.......here are my pics of what i been doing.... been making some work tables one for my Kreg jig and clamping and one for whatever i want....... Quote
heppnerguy Posted June 30, 2014 Report Posted June 30, 2014 WOW you have done all the things I was set out to do but I just couldn't stand having my shop down long enough to finish my dreams so i am still in need of a lot of things in mine. You are a great DIY guy. Great shop. Dick heppnerguy Quote
Stogies Posted July 16, 2014 Author Report Posted July 16, 2014 added ac to shop.....yeeaaaaaa 6 in joiner that was give to me .......the stand it was on........what I built for it and after i cleaned all the rust offf of itand my new Kreg topI have some more updates that i will post soon Quote
bobscroll Posted July 16, 2014 Report Posted July 16, 2014 Duane, Thank you for all the photo's you posted, I really appreciate, Paul you are SOOOO funny! Bob Quote
artmill Posted July 17, 2014 Report Posted July 17, 2014 Just a suggestion: more lights down center. Quote
Stogies Posted July 28, 2014 Author Report Posted July 28, 2014 did a little work on the lean too moved this bench from inside to here, needed room insidehere is a drawer i made for my benchhere is the frontmy clamp rack I built......I will post more updates soon...I hope to start building something soon ....seems like its all shop fixtures..... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.