Leaderboard

Just finished this one up.....the real reason for the season....36" W x 31"T .....2x6 lumber for everything except roof, they are 1x6....chunk of treated wood for the manger....added a little straw too...spray painted colonial red knocked down with sander.....comments are always appreciated....ty

Watching Bush 41's funeral inspired me to design and cut his Grumman Avenger TBM. Lots of very fine lines and rather than trying to recreate the prop blades, I had to make a ellipse sweep of the blade arc. The canopy was tough with all the intersecting frames. I did have to deviate from my original pattern in some areas to create more bridges. Lots of blue tape to hold it all together. 1/8" BBPW on 1/4" backer. Shellac/lacquer finish. Time to put the airplanes in the hangar for a while.

These are just a few ornaments that I have made this year. The blue ones are patterns by Sue Mey, I made them for a Secret Santa and my letter was I, which meant that I had to come up with something starting with that letter. Not an easy task. Anyway these are Intricate and have Indigo backing. I know Indigo is slightly darker but this is my interpretation. I have forgotten what any of the wood were, some of the patterns came from Sue Mey, some from The Village Ornaments for Charity book. Hope you like them. Marg Forgot to mention that it is Glitter Paper on the blue ones.

A few Christmas gifts for family and friends made up from left over wood from my intarsia projects over the past couple of years. Amazing how one can loose the knack for word art and fret work. Patterns are basically Steve Goods but with modifications to all with Inkscape. Actually that was a good in understanding Inkscape better.

finished this piece earlier this summer,ive made it over 24 months on and off,in fact this is my second time making this piece,i donated the first one to the local hospital,this one im keeping myself,made from mahogany,ash,pine

I pretty sure he meant adjustable front to back angle. However, the Hegner is the one saw that does have an adjustable stroke length. Hegner ships configured for the longer stroke, but for cutting thin materials, the stroke can be shortened. Not sure many people have gone to the effort to do that though. -------Randy

I do a couple of shows each year so have made a lot of stuff. But this is what we do for family and close friends. We send special cards with a sentiment written by my wife. I print them on Photo frame cards. I cut 37 ornaments 1.5mm Finish plywood. Stack cut. Then mounted with removable sticky dots on the card. We have been doing this since 2005. It is one of those ideas that has gotten out of control but we love it. Unfortunately I have no pictures of the bigger items I made for sale such as a modified version of this Intarsia nativity the picture is last years.

Thanks Randy, yes I did mean adjustable front back blade motion. I will edit my post. I was not aware of that capability on the Hegner. Kevin I just looked up what I paid for my G4 April 2005 $1214.00 that was with shipping. It has paid for almost all of the tools in my shop since then. Certainly one of the best tool investments I have ever made, definitely the most fun.

A few of this years ornaments. Marg

I was asked to make this for a friend, I love doing these name plaques. She seems quite pleased with it.

My Aunt wanted coin banks for her grand kids. Just finished them up tonight. No pattern, just kind of made it up as I went. 4/4 cedar with acrylic panels up front and bb backer.

I made this pattern and cut is specially for my friend for wedding day laminated MDF, 3mm, 4 layers pattern is available at https://www.etsy.com/shop/AlexFoxUA

I used a pattern I'd gotten from Scroller Limited years ago. It was supposed to be mounted on rough cut wood, I had made some of projects of this type before and the rough wood is a dust magnet. I used 1/4" plywood for the background and used stencils to spray the snow and sky along with the clouds. The Santa and other things in the picture are cut from 1/8"BB plywood. I used diluted acrylic paint to stain the various parts of the picture. The frames are made from 1x2 pine, I cut a rabbit in the back for the plywood and a 1/8" groove to put glass in the front of the frame to keep dust out.

A couple of projects this weekend. First...lemme say...I'm kinda proud of myself for not taking these frames out and setting them on fire. Or worse. They're for two of the "It Is Well" projects I was requested to do. The stars were NOT in alignment with the making of these frames, everything from my table saw not ripping the back of the frame pieces correctly (it wasn't just mis-measurement on my part, it literally started wandering down the middle of the back of one piece...had to trim the entire poplar 1x2 down to about 1x1.75 to fix that), to corners not coming together, to frustrations from Life in general....grrr. They're glued, clamped, and will be stained tomorrow if I don't toss em and go buy another piece of stock (wasn't sure if I was going to have enough to finish...ended up with about 4" left over after cutting enough for two frames). As of right now, if I never make another frame, I'll be happy. So after the frame frustrations, I needed a win to balance the scales a bit, so to speak. So....one of my Inkscape designs. Might as well, right? Just to make sure it was a good cut, easy cut. I freehanded the steam coming off the coffee cup a bit, I think I like this one better but my freehand skillz in Inkscape are crap, so anyone cutting this on their own, do with it as you will. Now to find something to cut/build tomorrow, because on the Sawdust Karma scale, today breaks even.

If it were me and I was spending that kind of money for a bandsaw I would not buy Jet. I would look at Laguna saws. Yes will be more money but you are up there already. Why do you need an 18" saw may I ask. Also would not touch a saw that large unless it had at least a 3HP motor on it.

I remembered seeing some threads on Sawmill Creek about this saw. Apparently, you had better take a close look at it to make sure you aren't getting the model that flexes when you use large blades. Also, the are talking used prices of $450 - $600. https://sawmillcreek.org/showthread.php?114430-Jet-bandsaw-JWBS-18-1-5-HP-good-buy https://sawmillcreek.org/showthread.php?195473-Jet-JWBS-18-Bandsaw-questions https://sawmillcreek.org/showthread.php?162742-Jet-18-quot-Band-Saw-Model-JWBS-18X-3-What-does-every-one-think-of-it

Preventing the material from melting back together, behind the blade, is probably the single biggest challenge when cutting acrylic. As previously mentioned, the proper blade, speed & feed rate will help minimize this. Most acrylics come with a protective paper covering on both sides, at least commercially they do. I work at a manufacturing plant and our machine shop makes a number of parts out of various types of acrylic. I scored some nice sized, scrap pieces of Makrolon polycarbonate, (also commonly branded as Lexan) which looks a lot like acrylic, but is a little different. It cuts very nicely and doesn't have nearly the tendency to fuse back together. I don't know how expensive it is or how readily available it is for hobbiest use, but maybe worth taking a look to see.

I sandwich it between 2 pieces of 1/8'' birch plywood, wrap it all up in blue painters tape.

I like to put it on a 1/8" piece of baltic birch and scroll as normal. I do this when cutting on my table saw also.

I haven't done any acrylic lately, but what I remember is to use a blade with a high tooth count. Also, saw at a slower speed, or the plastic will melt and fuse back together as you saw. Also, using a protective cover (like masking tape or packing tape) will help keep the melting down. The cover will also help to keep the surface from scratching while sawing. Other than that, it will cut just fine. If you want a shiny edge, it can be "polished" by using a propane torch very carefully. Your best option is to get some and practice till you work out how it does for you.

I only did my first craft show this year. I did well enough to try more next year. I make mixed wood crafts, maybe only 15-20% being scroll sawed. What really made the day was the last sale of the day for $85... to my former work supervisor... trust me, I deserved it.

Beautiful work Marg! Somehow the two snowflakes with initials ended up at my house! They are Maple and cut to perfection. I usually do an ornament exchange with Marg but because of my illness and monthlong hospital stay, I haven’t been in the shop since mid October. I will make it up to you next year Marg!

Hi All, I would very much like to hear your thoughts on a good scroll saw. My budget is between $500-$800 for everything I am new to scrolling and was going to get a DeWalt DW788 with light and stand from Rockler for $500. After more research I was wondering if it was worth spending a bit more for another saw. Would love to buy an Excalibur 21 but now that they are made in China and there is no reliable reviews and one has to wonder why the price drop. Excalibur 21” with foot switch and stand $750. The King Industrial XL-16 is $730 for saw and stand but is sold in a different state (NH Woodcraft store, a couple hours away from me) Just trying to figure out which may be the most bang for my buck as well as availabilty for repairs if/when needed. Hawk and Hegner are out of my scroll saw budget. I have spent the last 6 months watching ads (while renovatng my house),FB and craigslist for good used scroll saws and there have been none near me. Thanks for the help

Finished this Firefighter Plaque, Sue Mey pattern.

I used pattern SLDK459 from Sheila Landry's website and made a few adjustments. I increased the size to 110% and cut and past the patterns designed to go on multiple boards to apply to the single Ocooch oak plywood in the 16 in by 24 in size. This is now hanging in our church's Adult Bible Study classroom.

I made a portrait of my mom's German Shepherd, George. She sent me a picture of him enjoying a boat ride and I created a template and went at it. I used Maple, Walnut, Mahogany, Blood wood (tongue), and paddock (collar). I made the frame using Cherry with Walnut trim. Enjoy, Dan

and if you do not know the song

Hey Kevin, isn't there a restaurant in Saginaw where you can get a BLT with a pound or two of bacon in it. Add some greasy fries and you can feed all five and be a real hero for probably 30 bucks.

Here's the pics of the blower that's simplicity itself. There's a bolt attached to a trimmed washer I drilled a concave hole in and held on with twisted cable ties. These won't last and I need to figure a more permanent solution (suggestions welcome). I don't want to drill the arm itself and would like the bolt to be able to flex a bit rather than be rigid because the arm travels in an arc. Replace the cover and attach a conical washer, round side down. This is just the right size that the cylinder from a roll of double sided tape slips on easily. The washer flexes inwards on the down stroke to let in air and out on the up to push out the air. If you're going to use a normal flat rubber washer you'd need a smaller diameter metal washer underneath to achieve the same result. The cylinder is epoxied to a piece of ply that screws into the existing holes in the frame and I found a bottle top in the kitchen that is the exact size to clip on. The hose connector is a cut off rawl plug that's also epoxied in place.

From what I see those sell for a little over $2000. So if it is in good shape may be a good deal. You would want to be able to check it out thoroughly. I only have one Jet tool. It is a drill press. It does it's job. I can not run it at full speed, it sounds like it is going to fly apart if I do. Had I tried it at full speed when I first purchased it I would has sent it back. But I had it for some time before I wanted to drill something at that high of speed. The knobs on the handles for the raising lowering mechanism are GLUED on with some kind of icky glue the to this day is still seeping out and gets all over my hands. I thought that was really cheezy for an big , to me expensive, piece of equipment like that. But is has a Chuck that will close all the way so i can use tiny bits and it runs true and at up to 3/4 speed it runs nice smooth. I would give it 3 out of 5 stars.

So cherry love it.

That's perty cool!:)) I just happen to have a Great Grandson who's name is Braxton Jacob.:) This gives me a couple ideas fer him. I hope ya don't mind me usin' your project for future thoughts. Awesome cut work!!!:)) Keep Slingin' the sawdust!:) Sawdust703(Brad)

I just finished sawing this (modified) Steve Good pattern and am looking for suggestions to best display it. I recently dismantled a very early 1900's Singer treadle sewing machine. My wife wants the cast legs made into a table. I've salvaged all of the wood. I thought it appropriate to some of it on this wall hanging. It is constructed with 1-3/4 wide boards (oak, I think) with a 1/32" oak veneer of both sides. Thickness is 1/2". This is the hardest wood I've ever run into and sawing for this beginner was a task. I wanted to leave the original finish. I'm not sure what the finish is but it is dark. And that's my problem. With the finish so dark the lettering and features kind of disappear. Thought about hanging it in a window to get backlight but doubt my DW will want it there. I'm looking for suggestions on how to best present this piece. Thanks, Tom

Nice work, Dan. Merry Christmas.

Top banana MARG rOLY

Nice work all around !

So pretty.

Very nice Marg. Beautifully cut. Rob

What a terrific looking piece, they will certainly be pleased with their purchase. Marg

I made mine into a clock because that is what I do, make clocks.

Ever think it might be a good trade? Just wonderin'.

I had a 216VS Hawk. I loved it. Worked like a champ and was in beautiful condition. Paid $200. I sold it when I found my present 220VS Ultra Hawk. Paid $200 although it had a bad controller. It was not even on the saw so I knew what was in store. Beautiful saw. I would not have room for a 226.

This is a most entertaining and informative discussion. I guess we each belong in our own little camp. Mine is in the Hawk camp. For me there is no better saw but only because I have one. This is all OK. I love these threads.

I completely agree with you Stoney. I had a used Hegner saw and I realized what it's negative aspects were. My first complaint is the outrageous cost of parts. The reason I no longer have the saw is the speed problem that I encountered with it. And to fix it would have been ridiculous. So, I sold it. I have no personal experience with it but from what I have read and heard, the PS Woods saw is very much like the Hegner, American made and very reasonable in price. Customer support is great also. Sure, you might have to move a belt to change speed but how often does a scroller have to do that? If a used one ever comes on the market near me, I'm going to buy it and give it a test ride. If I don't like it, I'll sell it.

Well Bill by now then we should have that ultimate saw out there that has all the features us scroller are looking for. Can you name that saw??? Is this that saw?? Should be being the latest one on the market. Every manufacturer has their gizmos and gadgets and selling talk but in the end it still comes down to what you think will make scrolling easier for you and more enjoyable. Why has none of these companies come up with a dust collection system built into their saws. Can easily be done. They all should. Health issues are always a concern. Look at Saw Stop.

Don't forget about the two newer Jet saws.. a 18" and a 22".. basically the same design as the Excalibur with a different clamping system.. Lower clamps are like the old style barrel lamp of the Hawks.. and the upper one is a complete different mechanism that I think I'd personally love.. well at least the concept seems cool.. haven't used it so cannot speak about it.. they sort of have a love hate deal with those that own them.. some love the clamps.. others hate it and bought the Pegas, LOL

Usually the only time I find awesome deals on Craigslist or Facebook marketplace is when I'm broke... otherwise they are asking as much as new cost for stuff when I'm actually looking to buy something and have the cash.. That said though... I've found and bought more than my share of deals...

Where are you located? That may have a lot to do with what you have available also. Keep your eye on Craigslist in your area. Lots of used saws near what I live but I'm in a heavily populated area.

If you have never used a Scroll saw before I don't think I would go for the top end saws, yow may not like scrolling or might not be able to do it I have some friends who tired it and didn't like it. they say that the porter cable is a good starter saw at $300 I had one and returned it after a week. didn't like the chaining of the blade. I had two Dewalt's 788 one used and one new Both were worn out with in 2 years and the cost was too high to repair. The new one was in the shop within 6 months the electronics went out on it and the service was rotten, so This time I B bought a Delta for $400 and ran it all summer with no problems and it has a 5 year Werrenty The delta is not a digressive as the Dewalt. so it takes a little longer to cut a project. IKE

The tray and the dragon are separate designs from Steve Good I combined. I made three of the cherry and six of the walnut. They go to various family members.