Leaderboard

I wanted to do a second Chet Atkins scrolling for a gift, but just slightly larger than the first one I did. I decided to add a bit more detail to his fingers, but was somewhat limited as it is still quite small (6 3/8 W x 7 3/4 L for the original, and 6 7/8 x 8 1/4 for the new one).

Since the whole state is shut down, I got time to do some of the patterns I keep pushing aside. This is one of them.

Here is my version of Grampa’s RAMBO. Hope I have done it justice. Thanks for the pattern Grampa.

I was asked to make this as a raffle prize for our county centennial. The logo was designed by a local artist. The backer is maple flooring I was able to salvage out of an old community hall that was torn down quite a few years ago. The logo and letters are actually oak ply, but I stained them with Minwax Dark Walnut stain to help them stand out more. Overal size is roughly 33" wide by 19" tall.

BA pattern by Charles Dearing and found in his book "Wildlife Portraits in Wood". Cut using Pegas #1 Spiral blades on the demo Pegas Scroll Saw at ArtCrafters. All ready 100 holes with many more to go.

I've been cutting (and painting gluing etc) all month on this order. I think I'm done with circles for a bit -- way too many -- but I think I've got it down - wish I had paint down as well edit: sorry I should have put in what I was using I guess -- 3/8 Baltic with a #1 modified geometry -- the rest of it uses 1/8 - 1/4 - 3/8 - and 3/4 baltic 1.mp4

No I did all of them on the scroll saw --- I have one but I haven't had time to try it much less learn it -- the letters were all set without a jig either -- I tend to think a jig sort of makes the process less a part of me -- I love the space I get in while focused like this

Well being in lock down, decided to conquer the demons of spiral blades. Have occasionally tried over the years, but since I don't do many portraits, gone by the wayside. Well doing one of the American Indian patterns from this site and so giving it a try. Found out a few things. Even though I like cutting with the 2/0, they are so flimsy that they turn into a pretzel in about 15 minutes of use. The 1 and 3 are better, so the big cuts will be handled with them and the real small cuts at the finale will be with the 2/0. So far, I'm getting to like them. The question for you spiral gurus? Do you prefer pushing the wood into the blade as with normal scroll saw blades or pulling the wood into the blade. So far, I'm just moving the wood any way I feel would be easiest which I guess is supposed to be the beauty of spiral blades. Maybe in a few days, I'll even post the final product in the show and tell section. Stay safe guys and gals. Blake

Learning to dance has been a passage of youth in America, and here's a little sign for a little dancer, of which there are many. I cut mine from oak and cut an improvised base from cherry, which seemed to have made a nice combination. Free Pattern I've got a little video on YouTube on working with bases to break the ordinary trend of just using an oval, circle, or rectangle base. Click here if you want to check it out.

We are having a hard time with Kovid19 I made this letter the shape of a bat I hope Kovid 19 will end soon youtube : https://youtu.be/o1hb6-cuIKA

the majority of the time I spin the board around a bit so as to cut from the front of the blade as if it's a flat blade.. I will cut from the sides on slight curves etc.. but the majority of cutting it the front.. That said.. I sometimes will take the blade out and re-install it so I can make use of the teeth on the back side too... since I rarely cut on the back portion of the blade..

95% of my cutting is done with spirals. I have a Dewalt and as many state it can seem a bit more aggressive than some other saws. I find my saw likes to cut better on the push stroke. I can also hold a straight line while pulling but for my style, pulling requires me to slow down a bit. I run with far more tension than with flat blades. I have never really had a noticeable problem with hot blades. I think people get wrapped up in the idea they can cut in any direction with spirals. Yes, you can but you don't HAVE to. I turn my wood quite often. Some times long curves etc. just seem easier for me when I do. People , especially those that never use spirals get confused when someone says they use 2/0 and 3/0 blades a lot. If you compare a 2/0 spiral blade next to a #2 or #3 flat blade things begin to make sense. I use a lot of 2/0 blades and when I use even a #5 flat blade it amazes me the size of the blade. I started with spiral blades back in the mid 80's because there were no "experts" or youtube videos to tell me I was insane. Now I struggle with straight blades and other than less sanding and a nicer cut surface, I'm not sure why I try.

You have WAY more patience than I do, I would have used a router and a template and save hours of time. But you're finished product sure looks nice.

I made this Steve Good pattern for a nephew of mine that worked at a paper mill until he was about 70 years old and finally retired last month. He had big plans for traveling and being with many friends and relatives for a big get together, retirement party when the virus thing hit and plans had to be delayed. Both his wife and he were very upset as it was to be a big celebration and the disappointment set in and depression was surfacing. When I read about how much disappointment they were feeling and knowing he is a big fan of custom cars and owns one himself, as well as in a custom car club for years, I knew I just had to make this for him and try to bring his mood up just a little. He received it today and it worked. He was very pleased with such a small jester as this and it sure made it worth the small effort it was for me to do it for him. These things is worth more to me than a $600 craft show. The satisfaction of knowing that this one small piece of scrolling will probably remind him of me, every time he sees it. What a great pat on the back that will be for me, even though I will not know when that happens. I can't express the big lift it was for me when he emailed me and posted it on Facebook. Dick heppnerguy

No idea who,s pattern.cut on 3/4" oak plywood with a #9 FD scroll reverse.Will stain later.I think 4 hours of cutting.

Laugh when you can, it’s good medicine. I have no idea where the pattern came from, it has been in my pattern file for years. 1/2” Maple with a Cherry veneer, MDF core plywood backer. I cut two. I finished these several weeks ago. I set them aside waiting for my finish to arrive via mail order. When I went to finish them, they had both warped. I had already posted them on my Etsy store. I removed them from Etsy and stuck them in a drawer. I came back a week later, and they both had flattened out! I sprayed my lacquer and they are both fine now!

I put this pattern in the library if anyone's interested. I added a couple of things afterward before cutting it. Is anyone familiar enough with the song to notice a couple of symbolic things I included?

SSV Nation, I have to wait on more flooring to arrive so I can press on with that (Kept me busy for a bit). I finally was able to make it back into the garage today and made this. Thanks for all who encouraged me as it has almost six months since I started scrolling. Hope you like it and welcome feedback. Hendo

Thanks for the nice comment.

Thanks Peter. It sure takes some time.

I can tell already that is going to be an amazing cutting.

Thanks Paul.

With no customers coming in your store you have plenty of time to make sawdust. Looking great so far, keep safe.

Looking mighty good Denny.

You did it justice.....

Jay, some time get a pack of Pegas 2/0 spirals. Their size seems to be just between the FD 3/0 and 2/0. At least that is how they feel to me. Since I tried them, my go to spirals are Pegas 2/0 most used and FD 3/0 for smallest used.

Most of my work is fine fretwork and spirals have become my blade of choice for a long time now - it's rare that I will use a flat blade on any fretwork any more. My go-to blade is a 3/0 FD, sometimes a 1/0 FD - very rare that I use a larger blade. Here's a couple thoughts for you: keep your saw tuned - meaning the blade is absolutely vertical to the table - straight up and down - side to side - and front to back. keep your blade tight. use slow speed and slow feed till you find the sweet spot - which can be very different from project to project depending on wood thickness and species if you find yourself pushing (or pulling) too much then it's time to change, or re-tension, the blade. stay focused on smooth and gentle movements - distractions (of any kind) are a guaranteed wobble in your cut. on fuzzies: i always soften my cut edges with a sanding mop - meaning the fuzzies are also removed. Spirals do have a bit of a learning curve but for fine fretwork and on larger projects they really do excel (IMHO). Thanks, Jay

very nice job

Add me to that list, I feel the same way. The ease of cutting (in some respects) is not worth the added work of removing fuzzzies.

I guess if your comfortable and relaxed enough, it can be zen like.

Maybe I am doing something wrong but I hate the fuzzies spiral blades leave. If you have a recommendation of a blade that takes care of this let me know.

I cut a little faster pushing the wood into the blade but I rarely turn the wood. I use 2/0 and #1 when using spirals.

I sure hope you did the outsides on the bandsaw. A good circle cutting jig will do wonders.

You could use a circle cutting jig on a band saw and I'm pretty sure you can make one for a scroll saw. Regardless they look great!

I was just going to ask if using a router for some of those would have been faster and easier? Great job though - I need to make a bunch and am dreading the process

All is well, loosen the motor’s screws and fine tune it, had to move it about 1/4”. Now let’s get some projects done, still have 8 days left of self isolation.

Lock down seems to running rampant. Our Governor has the county I live is under it . I use spirals for certain things, mainly stuff ;larger then my saw. I find that taking your time and going slower helps a lot. I use a lot of 0/3 and don't have many problems with it. Going slow keeps the heat down and gives better control . As for moving around the pattern I go what ever way the lines are running. Keep in mind these cut in 360 degrees so they are almost always cutting some wood which makes it a little harder to keep them cooler. Best of luck, it's has it's own learning curve.

I am always looking for Intarsia wood - interesting color and grain patterns. Found some plan Hickory I thought would work. Cuts OK, sanding and shaping is a real pain. This week, I felt lazing and just wanted to sit at the saw and cut something. Turns out I LIKE Hickory for shelf sitters, more so than my usual Red Oak.

Hello it is sunday morning here I just finished AK-47 movie I still working on 50state map actually I made 50states map but I'm still progressing picutures and movie stuffs I hope to finish it soon ~~~~ have a good day~~:) ak-47 880mm 80 pieces puzzle it is divided into 7 parts (barrel,wood grip,body,magazine,grip,butt and rear sight) 880mm long ,18mm thickness made by walnut and soft maple wood how to make ak-47 movie please visit my channel

so pretty and useful too!! thank you for shareing!

For sure, Pete. The door are locked and we see people by appointment only. I was waiting for a FedEx shipment of Pegas blades. Supposed to be both yesterday and today. We were here and the truck drove by without stopping.

Very nice.

Great looking work. I give you two chet marks!

awesome job, it's beautiful

Boy, I,m glad you did this one the way you did! Burning never looked good in my eyes but with your Indian it fits perfect, thanks!!! I see you had fun cutting it,good job!!!

Little thoughts in a big way!!!!!!!

Y'all know that I can't get enough of the Old West themed pictures. Here's my latest. Pattern and cutting by me. Pegas 2/0 Spiral blades, 1/4" Baltic Ply, 8x10".

Love the Old West, too. Great picture.

AHH, the thrill of the first sale! Now to sell, more and more and more! You will make billions in no time. Or maybe an extra beer. RJF

Phenomenal workmanship!!!