Leaderboard

Had a bunch of short scraps laying around and used a whole lot of Titebond3 and nearly every screw clamp I own to make a laminated blank for birdhouses. I cut one into the face of the blank and rotated the other one 1/4 turn and cut into the lamination. Used #5 crown tooth blade (one per birdhouse). Got some burning on one of them, but some good old 220 make quick work of that. Just an idea to use up small scraps. Might have been better with some thinner boards, but you play the cards you're dealt.

I found this on the internet a long time ago. Never could fine who’s pattern it was. I really like it.

I have 5 great grandchildren and I will make one for each. This is #2 and others as they get older. The pattern is by Paul Meisel and found in SWWC issue 66. I used 3/4” Pine for the body and 1/2”Cherry for the ears. Cut on the Pegas Scroll Saw with Pegas #5R MGT blades. Comments welcome.

Hey everybody. I haven't been in the shop much the last couple of months. I started metal detecting and I'm a little addicted. A friend who has bought a couple of things from me sent a FB message saying her son just got married and is away in the military. He and his wife love the outdoors and their 2 dogs, a lab and a husky. Anyway she said if I ever did anything with a couple and two dogs she wants to buy it. Put this together using clip art, I can't draw. Found out they honeymooned at the ocean. The piece of Walnut had 2 knots which I didn't like because I wanted the bigger knot to be the sun. The smaller one had an x shaped crack in it so I turned it into an eagle. Since her son is serving us it'll be free of course. Hope everyone's doing well.

I did the original Howard 500 plaque for a friend back in 7/17 because he had flown this aircraft many years ago. He invited me to join a FB group dedicated to recip corp aircraft. I posted it on that site an a member said that his Dad (+) had brought it back from Canada for restoration at his shop in FFL and he had also flown it for a few years before they sold it. Made a plaque for him also but added his Dad's company name. I made some mods to the original pattern for easier cutting. Some of the peninsulares were kind of floppy and thin on the nose.

Hello, this is a name display which I made a couple months ago. I have made a few name displays with one name but usually make them with two names. I design them using Inkscape, a free product with a lot of features. I cut this from a single piece of oak, 3/4" thick, 12" wide, 7.5" high. Cutting was done on a scroll saw. On the back I added a sawtooth hanger so it hangs on the wall.

Thank you Mahendra for the great pattern of my friends step daughter. The other is for a friend of mine. I missed her wedding. So I hope this makes up for it. Thanks for looking. Have a great rest of the weekend and be safe.

I could not resist doing this doggy bank. 3 layers thick I wish I had cut on the band saw instead of the scroll saw .just clear coated with poly quick dry. Polplar wood sands so hard with 220 on a drum sander.3/4" poplar 3 ply ears,magic marker eyes and mouth,lol I,m lazy

Loved cutting this one, It is a pattern of Sam Custodio I think it is quite humorous. It was cut from 4mm marine ply with No1Penguin Silver Reverse blades. This one is No 20 for my best customer. Cheers Peter

Tony, Two more videos on the Diamond. Larry

I agree with the direct shipments from China. Besides the quality issues I hate the long delivery times. I did however order a replacement print head for my large format printer through Alibaba It came direct from the factory where they are made for many printers. It worked beautifully and restored an expensive printer.

Terrific work Mimi. Such a short life, condolences for your friends loss. Marg

I also used the four part video from Gwinnett when I did my DeWalt years ago. I couldn’t find any on the ex-21 when I did that one last fall. But I made out okay with it just taking my time and laying the parts out in order. I will be taking the Ex-21 apart again soon to replace the whole guts of the machine. I might try to put a video together of the process.

I enjoyed the video very much!!! Thank you!!!!!!!!!

I use a program called "aTubewatcher" to download videos from youtube to my computer. After downloading all 4 of them I used Windows MovieMaker to stitch them all together into one movie. I referred to it often when I had my 788.

Sorry to hear about your troubles Ike. I hope your new Excalibur is a good one Ike. The current Excalibur EX is made in China and is not getting good reviews. Just ask Kevin @kmmcrafts.

gwinnett woodworkers has a 4 part series on tearing down and fixing the dewalt 788 scroll saws, search youtube for the videos. all total they are several hours long. lots of great info though doug

My 18 month Delta has a ad bearing in it so I sent it to the repair shop for warentee work who knows how long that will take soi went and ordered a new Excalabor EX 21 I finally have enough money for it, but I didn't tell my Wife what it cost.Hope it doesn't take too long getting here , I will probably get my shop cleaned out it's been months since it was cleaned I didn't spend that much money for my first used car, a 57 chev IKE

I decided to make something different, and chose box - it is practical and new for me. Also I added layered technic. Size: 7,5 x 4,5 x 3 inches. What do you think? Video of making box Flower box pattern

love both planes!!! you guys do such great work!!!

Thanks for that,

I don’t understand why that would be an issue. (?)

Please do!

That is a stunning piece of simplicity. Beautiful work.

Beautiful! That will be a treasured piece!

awesome work

beautiful work

Same here... in the past, but no more, I did get a couple of these direct ship from China items and was very dissatisfied with the quality.

Great work on the cutting of this

I love this piece. You did a great job on it. Marg

To me nowadays, everything sounds expensive. Fixed income sucks!

That’s a great piece Ron, very nice work!

You did well Mimi!

A Helda Botas Pattern. He made this when we had the bushfires in Oz. I love it. Very well executed

I saw those videos that last hours, but I also know my attention squirrel!!!! What were we talking about?

I'm getting more quotes. I have to retrieve my motor Monday and get the motor details of of it so I can shop it around. An electrician friend of mine thinks the quote is pretty close.

My wife and I are trying very hard to not buy Chinese goods. It's difficult but we only do it if we can't find a U.S.A. made equivelant.

Woodstock bound!

Optimally the most discrete woodwork I've ever seen!!!! WOW!!!!!!!!!!!!!!!!!!!

Your running on jet fuel with your amazing ides, Keep them coming!!!

Nice one,Keep your work coming!!!

The last supper was "tilt" and now this, My God your skills are on fire!!!!

G'day all, Not really bragging, I was just looking something on old drives and came across this plaque I made for my Daughter's friend about 14 years ago. From memory, it was something to do with a game?. The angled shot is the true colours. They are real photos, not digital, that I scanned into the computer way back then

Interesting and well done.

Beautiful piece Charlie!

Nice work Denny! Should make a nice gift from Great Grampa!

I love looking at your pieces Charlie. Each one is so unique. This is another exceptional one. Well done.

Cute pup, nicely cut!

No mate it was not particularly hard but it did have a few delicate parts. I have had a lot worse.