Jump to content
🎄 🎄 🎄 2024 Custom Ornament Business Kit - Now Available - SALE 50% Off Through Dec. 2nd ×
Ornaments For Charity eBook - Designers Wanted! ​​​​​​​🙏 ×

Leaderboard

  1. danny

    danny

    Member


    • Points

      16

    • Posts

      1,131


  2. goldfish

    goldfish

    Member


    • Points

      13

    • Posts

      480


  3. OCtoolguy

    OCtoolguy

    SSV Silver Patron


    • Points

      12

    • Posts

      10,035


  4. Nickel Falls

    Nickel Falls

    Member


    • Points

      10

    • Posts

      304


Popular Content

Showing content with the highest reputation on 06/16/2022 in all areas

  1. danny

    New type of Cross....

    I am in Many Scroll-saw Forums. Came across Crosses. Love at First Sight....SO.... I have got some finished up until the Shine part. DTR.... Comments Good or Not so Good Appreciated.........Danny :+}
    15 points
  2. Hi all I have made a few of these now. My sister wanted one when she found out i was making them. Thought i would put a little message on hers There made from old pallets and a scaffold board for the wheel
    10 points
  3. Dak0ta52

    Mare and Foal

    My niece, who has one of my WELCOME signs, wanted a topper she could display when there wasn't a holiday approaching. The pattern is from FrankzyScrolls and was free on the web. They are both cut from 1/4 Oak ply with a pine backer painted black. The light one is stained with Minwax Natural and my intentions for the dark one was to darken the horses and leave the outer areas light but clumsy me let a nice large drip of dark stain drop right into an area that should have been light, so.... I just stained it all Minwax Colonial Pine. Both have four layers of clear gloss with light sanding using 320 grit paper between coats. I'm still considering putting a hanger on each and framing them where they can be used either as a topper for the WELCOME sign OR hung on the wall. Just not sure if the frame would set the metal piece on the back too far away from the magnet where it wouldn't hold. I will add that these were the hardest patterns I've cut to date. There are only 6 holes. The cuts zig zag back and forth, up and down throughout each other making the pieces very fragile. Hope you like them.
    8 points
  4. A friend sent me the pattern, so I don't have a pattern source.
    7 points
  5. Insane Dust Maker

    Eagle

    This was a gift when I retired, it’s been wrapped in bubble plastic for 6-7 yrs. I found it this morning whilst looking for something else, gave it a good polish and will hang it up in the cottage. Because I’m doing scroll saw work now this Intarsia project has inspired me to add this to my list of projects I must try.
    6 points
  6. FrankEV

    RAven and Moon

    This Image has appeared in many Pinterest searches. Rather simple conversion to a 12” x12” scroll saw pattern. The cut panel is 5/32 solid core ply Birch (if I remember correctly) that I painted Black with Krylon rattle can All-in-one Flat Black Paint and Primer. The backer is ¼” BB Ply that I beached for a few days to get a very bright light wood “Moon” color that was then hand painted in the Grey and White areas using Artist Acrylic paints. Cutting was done with Pegas #1 Spirals and #3 MGT R. The assembled panel was protected with multiple coats of Deft Clear Gloss Lacquer. Frame is my typical 1 ¾” wide Poplar stained with Minwax Brazilian Rosewood Stain and protected with multiple coats of Minwax Wipe-on Clear Satin Poly. Comments and critiques always welcome.
    6 points
  7. Hawk

    Camping Setup

    First camping trip taking my scrollsaw with me. I preped 3 projects for this trip. My cutting got cut short due to upper 90's with a heat index over 100, then storms. Hoping today is better. Chris
    5 points
  8. Old Joe

    Feline Madness

    This one took a couple of minutes. I like to miniaturize most of my portrait type patterns, but at 7 1/4” x 11” I probably took it a little too far on this cat. The entire project was cut with Pegas 2/0 spirals. 1/4” Baltic Birch, Danish Oil applied,mounted on a nominal 1” pine board stained black. Though my wife loves this one, I think it was more trouble than it was worth.
    4 points
  9. Finally! I have been making these signs for a couple of years now but my graphics guy disappeared and I was out of luck. My Inkscape skills are not developed enough to recreate my signature design so I was dead in the water. I took a shot and asked @don in brooklin on if he could help instruct me to recreate the design. I had flat file, single layer pdf files but could not edit the various layers to create a new design. Don not only gave me the help I needed but created a template of the design with the necessary layers so I can easily edit the names and out put a finished pattern for my printer. I CANNOT thank Don enough for his time and expertise. Don you are a huge benefit to this forum and the scrollsaw community!! The top layer is cut from 1/4” bbp and the backer is mdf. I cut these on my Pegas using a #3mgt blade. I edge the sign with copper tape used for computer pcb board repair. The Wade sign is my original and the Roach and Steinberg signs were patterned from Don’s template in inkscape. I glue a burned logo disc on the back to brand it and also to help keep the sign flat when hung on a wall. Interestingly the Roach and Steinberg signs were stained with the same color stain just using a different technique. The Roach sign is for my adopted daughter who gets married on Saturday and the Steinberg sign is for my daughter who gets married in September neither of which would have been made without Don’s skill, talents and wonderful generosity.
    4 points
  10. I ran across 3 patterns that were supposed to be bud vases. I decided to make one and insert a flameless candle instead. I had to make a couple alterations so that the switch and battery door were available. I bought a set of 3 2 inch candles, a 2" & 4" along with the 6", so I shrunk the pattern to accommodate them. Two more candle holders in the works. This one is oak and cherry with just one coat of Watco natural oil. I don't know the pattern designer's name.
    4 points
  11. Nickel Falls

    Honey Bee

    Segmentation pattern by Shiela Landry. Fun one to do
    2 points
  12. 2 points
  13. Scrolling Steve

    RAven and Moon

    Nice, very nice!....Mr Poe would be proud.
    2 points
  14. Hawk

    Camping Setup

    We're in Gaylord Michigan, humidity was thru the roof. I managed to get some cutting done yesterday, but by 9:30 I was sweating so bad is was dripping off my face. Time to pack up and hide in the motorhome. Today completely different, sunny mid 70's. Very nice!
    2 points
  15. Latest name puzzle. Gift for my daughter's sister-in-law. 3/4" ply with 1/8 backer. Cut with #5 full reverse FD blade. Colour done by Unicorn Spit - I also painted the backer board with the matching colours. Finished with one coat of Tung Oil. The nursery apparently has a nautical theme so the left letter and right letter are the correct nautical colours. It is sitting on two newly made cell/tablet/e-book holders also cut with #5 mg blade and finished with Tung Oil. Steve Good pattern.
    2 points
  16. Charlie E

    Just finished this!

    Great job. That's a beautiful piece!
    2 points
  17. OCtoolguy

    Just finished this!

    Frank, I try to cut all the circles outside the cut line and then clean them up on a disc sander. Then it's just a matter of gluing them together. The actually bottom piece I did a router cut on the outer edge and bored a hole through it using a Forstner bit. The piece on top of it was a plain piece that was similar to the top piece but I cut a hole in it to accommodate the diameter of the candle. The actual top piece has a hole a bit bigger. It was supposed to be for a but vase but I have no idea where you'd buy bud vases that size and height. Anyway, I like the candles better.
    2 points
  18. Foxfold

    Branding / Trademark

    I found a nice font, turned it over so that it looks back to front, print a dozen on a page and then cut one out when needed. I tape to my work and apply laquer thinner sparingly, rub with the back of a spoon and hey presto, it's on my wood. After that I either apply a spray finish or go over the signature with my pyrography pen. Simples !!
    2 points
  19. heppnerguy

    Peacock for my wife

    I ran across this pattern on a European scroll saw page and asked where I could buy the pattern. I was drawn into it at first sight. I never received an answer but posted that I was looking for it. Luckily someone responded and I was able to get the pattern. It was in a format that I have never seen and I was unable to use it. I have a good friend who was able to change it into a format that I could use. After I got it printed, I decided I was not skilled enough to make it. I was kidded a lot about when i was going to make the project. So I finally decided I would at least give it a try. This is the end results and fortunately for me, my wife really liked it and it is now hanging on our front room wall. Each feather has 50 holes and there are about 36 feathers in the project. That meany each feather was going to take in the neighborhood of an hour to cut. Well long story shortened, I finally got through the project. I was not happy with the painting on the body of the bird, but other than that, I am happy with the overall results. Dick heppnerguy
    1 point
  20. I was wondering if anybody does their scrollsawing in an apartment or condo? For a range of reasons, I am considering moving to a smaller home which would not have a dedicated woodworking space but I don't want to give up my scrollsawing hobby. I am trying to decide if it is feasible to do scrollsawing and other small-scale woodworking in a spare bedroom. This bedroom would be sometimes used for guests so sawdust and tool storage are my primary concerns. Does anybody else use their scrollsaw in a condo or apartment, or in a bedroom that is also used for sleeping? -Alan
    1 point
  21. john nelson

    From The Pieces

    A few years ago, I saw an ad for a very large auction in Boston. In the ad was a photograph of a beautiful, unusual, scroll saw clock. It had a minimum starting bid of $500.00. I just had to have it so on the day of the auction, I got up very early and drove all the way to Boston from New Hampshire. It was a 3 1/2 hour drive. The auction was held in a very large room with many items to be auctioned off. I walked around the room two or three times and could NOT find the clock. I finally asked an attendant where it was. (Real men NEVER ask for directions) He told me it was completely destroyed on the flight in from Hawaii. He told me they built a box around it to try to protect it but somehow it was destroyed. He brought me over to a table in the far corner of the room where they had put all the pieces. The pieces were in three large ziplock bags with a photograph of what the clock DID look like. Most of the pieces were the size of a half-dollar coin. A few a little larger. I was thinking, I still want it and surely NO ONE in their right mind would want it, so I would be able to get it for almost nothing. When the bidding finally came up the pieces were brought out. The bidding started at $50.00. Believe it or not, there was another "clock-nut" and HE wanted it as much as I did. The bidding went up over $270.00, but, I won the bid. I am positive, everyone there thought I was completely out of my mind to spend that much for three bags of pieces and a photograph. I took the three bags and photograph home and set up two card tables side by side and laid out all the pieces. It was like putting together a very large puzzle. As I assembled the individual pieces I glued them together as best I could. After three or four weeks I had most all the individual pieces put back together. (I had to guess at a few) I took the individual glued pieces and drew each one out on paper. The only original pieces were good enough to save were the ones that formed the round head that supported the clock movement... everything else had to be remade. After a few weeks, it all came together. Of all the clock designs I have copied and recorded, this clock is, by far, my favorite and I think one of the most beautiful scroll saw clocks ever designed. Written by John Nelson. Reprinted with permission from the author.
    1 point
  22. Kris Martinson

    Leopard

    My first attempt at a leopard.
    1 point
  23. lawson56

    RAven and Moon

    A soon as I saw it I also thought of Poe. Love his work. And you did an Awesome job Frank.
    1 point
  24. lawson56

    Camping Setup

    Looks like a Beautiful spot, just the Blast Furnace needs to be turned off. Take care, the humidty will get ya every time.
    1 point
  25. OCtoolguy

    RAven and Moon

    I have always loved Poe. He did some really neat stuff. A very nice job there Frank.
    1 point
  26. Denny Knappen

    Camping Setup

    We went on a small vacation to Branson, MO. Very hot there too! Keep comfortable and have fun scrolling.
    1 point
  27. I do all my work in a 1 bdr apartment. Saw is set up in the dining room. Its tile so easy to sweep up. I dont do thick wood often that makes a lot of sawdust, usually just 1/8" bb which doesnt create much. No issues with lots of sawdust. I paint as well with acrylic sprayer and small compressor. I set up a little booth with some foam backer pieces taped together and it works great. Comes out low pressure anyway plus its water based so if its an issue it cleans right up. Way better than finding a windy spot outside. The hardest part is cutting the larger sheets of wood down to size with the scroll saw. I get 5 x 5's and have the man at the store cut them in half but they still need to be cut down to use. Once I get a few pieces out of one though its easier to manage. I did however get froggy and try using my router. That was a huge mistake, sawdust everywhere and years later still finding it just after a few minutes uses.
    1 point
  28. crupiea

    Bridging Dropouts

    Old school here. Print it out and draw them in with a pencil.
    1 point
  29. rjweb

    Just finished this!

    Beautiful piece Ray, RJ
    1 point
  30. danny

    Just finished this!

    I Remember this from Steve Good and I did cut this or another that looks like this one many years ago. Sold Great with the Vase.... Amazon you can find about anything. You Inspired me.... Think I shall cut a few. Yours looks Very Clean cut and Very well Finished...............Danny :+}
    1 point
  31. scrollerpete

    New type of Cross....

    You are the cross man, excellent work, you should be proud.
    1 point
  32. daveww1

    New type of Cross....

    excellent work, they're beautiful
    1 point
  33. 1 point
  34. wombatie

    New type of Cross....

    They look terrific Danny. Yes the top one is very snazzy. Marg
    1 point
  35. Love it. Well done. Marg
    1 point
  36. Millwab

    Branding / Trademark

    Ray, the woodburner I have is from Walnut Hollow and the custom tip with my logo is from Wall Lenk. They were able to make it for me because the thread size for the WH and their own brand are the same (8-32). Due to the size of the head the logo cannot exceed .75” x .75” The cost of the head with the logo is $74.20 + shipping USPS. If you only want your initials (up to 3) the cost is 27.49 + shipping USPS. The person I contacted at Wall Lenk is Chris Eastman (chris.e@wlenk.com Hope this helps
    1 point
  37. Charlie E

    Name Puzzle

    Great job and love the colors. 6 letter name with only 3 letters.
    1 point
  38. Charlie E

    New type of Cross....

    Very nice work Danny!
    1 point
  39. preprius

    New type of Cross....

    Wow those are pretty eye catching. The top one red black white, does look a bit snazzier. Are those about 20 inches tall? Me. Mark Eason
    1 point
  40. FrankEV

    Just finished this!

    Great job. Almost looks like the top and bottom was cut on a lathe. Thanks for the reply.
    1 point
  41. OCtoolguy

    Name Puzzle

    Excellent!
    1 point
  42. OCtoolguy

    Just finished this!

    All done on scroll saw, drill press and router.
    1 point
  43. bbuzz8233

    Bridging Dropouts

    I mainly use GIMP. I'm not very good with computer programs but I think I've figured out how to make use of your suggestion. Thanks for the help!
    1 point
  44. meflick

    Name Puzzle

    https://eclecticproducts.com/product-category/stains/unicorn_spit/ https://www.amazon.com/Unicorn-SPiT-Gel-Stain-Glaze/dp/B06WLMVN7R The magazine review was in Issue 76, Fall 2019. Since then, it has become fairly widely available at various stores in the US including most of the Arts and Craft stores, I saw an ad for Lowee also as well as a number of online stores. People use it on lots of projects, a quick Google or Pinterest search will show lots of different uses. Ice work on yours Barb.
    1 point
  45. dgman

    Just finished this!

    Looks good Ray, very nice work!
    1 point
  46. barb.j.enders

    Name Puzzle

    It was reviewed in the Scroll Saw magazine a few years back. I was thrilled to find it locally.
    1 point
  47. barb.j.enders

    Just finished this!

    Sure looks like compound cuts. Great job.
    1 point
  48. kmmcrafts

    Just finished this!

    Beautiful work Ray!!
    1 point
  49. OCtoolguy

    Just finished this!

    Yes, very perceptive. I'm going to make two more of varying heights.
    1 point
  50. OCtoolguy

    Just finished this!

    Dave, these aren't compound cut. Straight up cuts all on one board. Really an easy project. The mortise/tenons have to be tight though.
    1 point
  • Sign Up Today!

    Sign in to experience everything SSV has to offer:

    • Forums
    • User Galleries
    • Member Blogs
    • Pattern Library with 4,300+ Free Scroll Saw Patterns!
    • Scroll Saw resources and reviews.
    • Pattern & Supplier Directories
    • and More!

×
×
  • Create New...