Leaderboard

Made this for my granddaughter's 3rd birthday. First time cutting acrylic sheet. Piece of cake! Reading about problems cutting it had me terrified beforehand!

My first wooden ring work. Stone: Facet cut stem emerald. Wood: Olive-tree.

My favorite would be this chess set I made for my son in law. I also made one for my nephew. Mahogany and Birch.

I couldn't have said it better... I see many post about upgrading from an entry level saw to a DeWalt and they all say WOW! what a difference in the scrolling experience.. Take that next upgrade to a Hawk or Hegner and imagine the difference yet again.. plus a quality saw that's likely going to outlast any hobbyist.. and in many cases outlast even those running them in the production type setting.. Hawk and Hegner could be as popular in the scrolling sector if they were sold in box stores around the world like the others are.. Last I knew a 20" Hawk was only about $200 more than a Pegas.. and you're getting a lot more quality build machine.. That's not saying that a Pegas is an inferior saw.. but it does have it's limitations in a production type setting..

You should never feel that way. All of these discussions should be informative. Getting feedback from long time scrollers using a particular brand, and what features about them they really like is very helpful for folks looking to buy a saw. As I have said before, I was blessed to have a local club with some incredibly talented long time scrollers, Most used Hegners, the rest of us (in 2004) had an assortment. I had a Delta SS350 at the time, great saw. The club gave me the opportunity to try different saws. The Hegners more vertical stroke made it easier for me to do the delicate work that I like. I was starting to do larger projects and wanted to be able to top feed. At that time the Hawk G4 was just released, it was bigger and top fed so that was my choice. Otherwise it would have been a Hegner. For those that say you can do great work with an inexpensive saw Yes you can, I have. But I quickly realized I did not have the patience for tedious blade changes. Like my old Craftsman, Over a minute for a few second cut NOPE! not for me.

I just wanted to say thanks to everyone. It's nice to get back to scrolling after being away for the past months and thanks to your kind words I'm full steam ahead on this new path. Chris

The G4 and newer ( 2005+) Hawks you do not need to remove the blade holders and they also top or bottom feed. Lots of changes with both Hawk and Hegner over the years of their existence even though the saws look so similar to the older ones. Those newer Hawks also have a adjustable blade aggression.. But I do agree, those DeWalts are a great saw for the money, I ran one for 6 years before getting that first Hawk and I'd have kept it if the deal on the Excalibur hadn't showed up. I like the DeWalt stand and nice large table better than the Ex. Also like the stand on the Hegner better than the EX or Hawk, LOL..

Well, it's been some time since I've posted here, so I apologize if this is a bit long. After seeing the awesome work some have done with epoxy fill on their work I gave it a try, several times (lol) and each time, in my opinion was an epic fail. I just couldn't get the epoxy to be bubble free. I really wanted it to look like stained glass. So then the little voice in my head went " just use actual stained glass". I really shouldn't listen to that voice, but I tried. I've learned that I suck at cutting glass, result..epic fail #2. Then while at work and pondering my dilemma about how cool the stained glass stuff is and how talented those folks who can create those awesome looking pieces and I really wanted to do something like that except with wood on my scrollsaw! So after many attempts I came up with this. As this is only a test I used basswood to keep cost down and colored acrylic, which I cut on my scrollsaw (win-win) ! The acrylic is in the middle so it looks the same from both sides. For me this is a success, so on to different woods and more complex patterns, I'm thinking that Intarsia patterns might be a good fit for this. Now to dig thru all my Intarsia patterns. Chris

Our very own Barb J. Enders’ Sunflower puzzle was featured in the letters to the editor of the spring issue of ScrollSaw Woodworking and Crafts magazine! Nice work Barb!

I did this one a few years back. First attempt with spiral blades. I do one that was free from a colouring book page.

Thx Ray

These theads almost make me feel like someone wants me to justify why I have a Hegner. Not sure why. But I do not feel the need. My hegner will be with me as long as I can scroll. I'm very happy with it. Enough said.

My 788 ain’t fancy. I can top or bottom feed. I can change the blade without tools or adapters. If I have major problems, I can replace it at a reasonable price. I had a chance to buy a Hawk for $600, I passed.

A more expensive saw makes a minor difference in that it is more solid, easier blades changes, etc. I started with a single speed Delta from a pawn shop, moved to a Hitchai, then a Dewalt and now a Pegas. The first two were purchased solely on price and immediate availability. The last two were a combination of price and reputation. Each change had something better or easier than the previous. But, was the saw better--or was I getting better? I did have the Dewalt apart a few times lubing bearings and adjusting the tension rod.

Simple, but always received with thanks. I cut 'memorial' paws for any of my owners that have lost a much loved pet. Not hard to do, but it's the thought that counts I guess. Unfortunately in the last year we've lost 4 from our 'Foxfold' family.

Took me a bit to track it down on Steve’s blog as he shared it back in 2011, but here is a link to the pattern for anyone interested in making some for Valentine’s Day. (Hopefully nobody needs 6 for girlfriends or boyfriends though. (I have enough trouble taking care of 1 hubby .) https://scrollsawworkshop.blogspot.com/2011/03/i-love-you-this-much.html

I am part of the Herb Society of America and we love hummingbirds. I made a hummingbird plaque for the outgoing president. I enjoy segmentation and working with various types of wood stack-cutting. Hopefully it is a gift she will cherish for years to come.

Delivered amidst smiles.

Over 75 years ago, my dad made simple wood blocks. We would build towers up to the ceiling. These blocks are in our back closet and now the great grandkids play with them. What a joy.

At one time I used to know a way to do this but for the live of me I can't figure out what I did back in the day. Etsy changed the photo formatt requirements.. Many of my listings are "made to order" so it's not a matter of just going and retaking a photo for me. Does anyone know how to edit a photo to sort of zoom out so the photo isn't cut off in the square format.. See my screenshot to see what I mean.. Many of my photos on the main page are cut off like this.. I need to edit a lot of them.. some I can just retake.. some are made to order or shrinkwrap sealed and rather not open and have to rewrap them. Prefer inkscape instructions unless there is something easier.. I do have gimp too if that works.. or some other free program. Just saying I already have inkscape and gimp but I know more with inkscapes buttons etc, LOL See how the Semi truck front end is cut off.. and the Aussie dogs face is cut off.. This is what I need to try to fix.. hopefully without retaking photos.. They used to have a more rectangle photo and back then I had to edit some to zoom in.. now I need to reverse that. LOL