Leaderboard

I finally completed this project. I took me the longest of any project I have tried in my years of scrolling. Took two tries. I wanted to make a picture of a modern diesel train engine for my nephew-in-law that is a conductor. I could not find a pattern of one. Talking to @munzieb one time I mentioned it to him, he told to send him a picture of what you want and he would make a pattern. And he did, a real detailed pattern. A beautiful pattern.. I worked on it, gave up once, then decided to try again. I worked on this over a period of 4 or 5 months. Bernd Would call every once in a while to see how I was doing. I told him I was about to give up. I just could not scroll like I use to. He said he would give it a try. Two weeks latter he sends me his completed scrolled picture of it! So the challenge was thrown down. I had to quit whining and keep cutting. Finally got there. Many, many thanks to Bernd for the coaching and encouragement. Would never have finished it without it. I still have to frame it. The first picture is mine, the second is the one he cut and sent to me. His was even more difficult than mine, his was a little smaller.

Sasho contributed the pattern for this to our library about a year ago. To me, it's both sad and happy at the same it. I immediately cut it, but only this week got around to framing 'Life' and it now hangs over my desk. The foreground, the background, and the frame are all quarter-sawn white oak.

I crafted this plaque using ribbon striped (quarter sawed) sapele. When cutting the tree I set my saw at approximately a two degree angle. The tree worked well for this because it was one continuous cut. I pushed the tree out about 1/2 way and did a lot of sanding with a sanding mop. I'm very happy with the look.

I decided a day or two ago to try one of the color pictures. So I did this one.. I really enjoyed doing it. Kind of like making a puzzle. Cut everything out, paint the pieces and put it back together. The hardest part was waiting for the paint to dry...It was a lot of fun. Did not take long. Another reason I wanted to do it,, I went to the woodstore the other day, looking for wood to make a step stool... Decided to check out the price of BB. Last sheet of 1/8" cost me $18. Today it is $62! So I am making thing that I can use all the odd size pieces I have.. Any way, my first "scrap build". Lot of fun.

Finished this on Monday. Jeff Zaffino pattern, double stack 1/8 inch BB ply. Cut with #1 Niqua spiral 16 X 20. 1302 cuts with 772 just in the grass. Well worth the effort. Jeff

I started this project almost 2 months ago but had to set it aside after a few issues required me to remodel my bathroom and then I had to complete 2 commission projects. This is a Steve Good pattern and is cut with 1/4 Birch using Pegas 2/0 MFG. The back is 1/4 ply. The front is finished with natural stain while the back is finished with dark walnut. It then received several coats of clear gloss. The fine cuts were a little tricky and I had to keep reminding myself to let the blades do the work and not push it.

First ‘real’ project. Learned a bit in corners, blade tension and such. Using Olsen #7 crown tooth blades. My arm release mechanism made the job much easier with all the holes. Fun stuff!

My wife requested I do this project as a wedding gift. I may have tackled a fairly intense project with all the fretwork but overall I feel it came out pretty darn good. This pattern, as well as the pattern from my first project, are from Steve Good.

I did this one from a piece of cherry my brother gave me. I'm gonna give it to him for Christmas. I showed him a little at Thanksgiving on my scroll saw, he's bought a used saw and gonna give it a try. If I counted right there is 120 cuts on the outside and 54 on the inside. Total time was probably 4 hours. I finished it with 321. It's about 3/8" thick and I cut it with a # 1 FD. Thanks for looking.

Love making trucks. Wood used for these was Mahogany, Walnut, Maple and Ebony.

This was a super fun one to cut. Took me a few sitting at the saw.

A few new ones I finished up and finally took some photo's of them. The Cheetah is by Russ Beard, the hawk is one by Ian Thorley, the crow is by Kenny Hopkins and the LA Kings helmet is by Jeffery Flick. Thanks to all you pattern designers for letting me have so much fun. The Cheetah, LA Kings and Crow are done in 1/8 A-4 oak plywood. The hawk is done in 1/2 inch oak strips that I glued up to make a blank for cutting. All work done with flat blades from a bunch of different manufacturers. All cut on a King Canada 20 inch saw.

This is a clock like I made for my wife about 4 years ago and my grandson's fiancé told me that since they have been living in their own houses for a few years and have everything they need, they are not asking for wedding gifts, However, she did mention to my grandson that she would like one of Grandpa's clocks. ( This is the one she was talking about ) so I made them one. I have been working on it for about a month, due to all the company we have had and finally finished it yesterday, as everyone has left for about 10 days. I have two bells coming for the bell tower and then I will be completely finished. It has several coats of finish on it and in May we will be taking it to Oregon for the wedding. This is the most challenging piece I have ever made, along with the Eiffel Tower I made a few months back. Dick heppnerguy

Finished this morning. Botas Helder pattern on white poplar burl slab. 21 X 11 X 3/4 109 cuts with Sawbird #3 ultra reverse. Pre-oil and post oil pics.

Been working on this off an on. Red Oak an Walnut. Finished by dipping in 50/50 BLO. Front blade goes up and down also the blade swivels left an right. Hardest part was making the tracks. You can’t see in pictures but the tracks are guided by wheels. The tracks turn also. Used Pegas MG #5. Used bandsaw to cut groves around the engine cover. 15”x9”x9” pattern from Toys & Joys.

After I made the last Christmas stuff I posted a week or so ago, Sue Mey actually sent me a message and asked me to cut this and take pictures for her to put in her website. After the swelling in my head decreased, this is what I made. I am very humbled for her even ask me. The pattern is much better than my cutting for sure. The arches are made from Baltic birch and I put linseed oil on them. The base is a very old piece of plywood that's older than I am, with just some polyurethane on it.

Got it done... I really think the assembly and finishing was more difficult than the scrolling part... Usually is for me...But it was worth the effort,,,, now I have to decide what to do with it! I lined the inside of the "box" part with some veneer that I stained a dark color. Finished with about 6 coats of Deft gloss lacquer. The wood is 1/4" Mahogany from Ocooch Hardwoods. I would like to do another one just because I really enjoyed building this one...

Here are a couple of birds that I have made and decided to share in the fun by posting them for you to look at too. Dick heppnerguy

Straight off the saw. No finish, no frame. Just glad to have him done An H Botas pattern. Niqua #3 blade for all except the 'feathers'. 3mm B/B

A wedding gift for some awesome clients and friends. It really is square. I have a hard time getting a good picture of a picture. Fame is walnut. Fret work is 1/8" baltic birch with a 1/4" walnut plywood backer.

Just finished this beautiful Russ Beard Pattern, it was a double stack on 4mm Birch Plywood, cut with a Niqua 1 Pin Less blade, soaked in a BLO/Mineral Spirit Mixture, finished with a few coats of clear lacquer. Black backer and a second backed smaller than the original cut to give a shadow line effect. I cannot control the final colour appearance that the wood takes on, but I will accept it and am Blessed and Grateful that I am able to produce work like this.

This is my latest Intarsia piece. Pattern found in the issue # 54 of Scrollsaw Woodworking & Crafts magazine, designer Gary MacKay. Woods used Tigerwood, Maple, Canarywood, Quilted Maple, Sapelle. One generous coat of shellac. Used many #5 MG blades.

Wanted to make some small gift boxes and ordered some mahogony. 6 each 24 x 4" 1/8" boards (should have ordered 5-6" wide boards to better fit pattern). Stack cut 2 at a time. finish with gloss laquer. I had done the 2 center boxes with bubinga wood previously but it is getting very expensive. (twice as expensive as mahogony) Fun cutting.

I ran across this pattern on a European scroll saw page and asked where I could buy the pattern. I was drawn into it at first sight. I never received an answer but posted that I was looking for it. Luckily someone responded and I was able to get the pattern. It was in a format that I have never seen and I was unable to use it. I have a good friend who was able to change it into a format that I could use. After I got it printed, I decided I was not skilled enough to make it. I was kidded a lot about when i was going to make the project. So I finally decided I would at least give it a try. This is the end results and fortunately for me, my wife really liked it and it is now hanging on our front room wall. Each feather has 50 holes and there are about 36 feathers in the project. That meany each feather was going to take in the neighborhood of an hour to cut. Well long story shortened, I finally got through the project. I was not happy with the painting on the body of the bird, but other than that, I am happy with the overall results. Dick heppnerguy

I ran across this line image on-line and just had to convert it to a Scroll saw Pattern. I sized it to fit centered on a 5/32” x 12”x 12” Solid Core Maple Ply panel that I affixed to a Hand Painted ¼” thick BB Ply backer. The Tree of Life pattern needed a bit of work to eliminate a lot of dropouts. Also a lot of bridges added to the font letters. The lettering font of the lyrics to the song “Trees of Green” was very irregular shapes which made cutting with a spiral blade simple. Pegas #2/0 and #0 blades were used to do all the cutting. The Panel is set loose in a 1 3/4” wide Poplar Frame stained with Minwax Dark Walnut Stain and protected with multiple coats of Minwax Clear Gloss Wipe on Poly. Comments and critique welcome.

Got two Russ Beard patterns done, both were a lot of fun but each was over 400 cuts. The wolf one is done on a 3/4 inch oak TV tray. the 2 tigers are done on oak also but it is several strips I edge glued up for a cutting piece, it is about a 1/2 inch thick. Blades used were on the 3/4 piece #5 UR dutchman and for the 1/2 oak # 3 UR dutchman blades. All worked good for me. Had a small issue on the large 3/4 inch oak but Charlie Hand helped out and gave me a couple of tips that worked great. My thanks to Russ for both patterns I really am happy how they came out.

In between projects and looking for something different I decided to make a sign to hang on the outside of my little shop. Found a S. Good fretwork Welcome sign pattern that I used but changed the wording. Panel is 1/4” x 12” x 15” Walnut Solid Core Plywood and affixed to a 1/2" sanded plywood backer. I deepened the contrast by staining the panel with multiple coats of Minwax Walnut Stain. The script is called "Handwritten" that I have individual .svg files for each letter in upper and lower case. All cutting was done with Pegas #0 and #1 spiral blades. The panel is glued into a 3/4” wide Poplar frame that I rounded over on the Router and made a 1/4” wide x 3/4” deep rabbet to match the panel depth. I stained the frame with Minwax Honey Maple. After fully assembled, the sign was protected for outdoor use with multiple coats of Clear Gloss Polyurethane spray.

My Sister aske for a special Christmas gift. She has a lot of Jewelry chains that always get knoted up in her regular jewelry box and asked if I could make her a case where she could hang her chains. I looked a several boxes on the web to get some ideas and came up with my own design (on the fly!) I would have like to use an exotic wood but it is getting very expensive so I went with 1/2" Poplar since it would be painted. Built the doors first since that would determine the final size of the box. Routered the recess for the front plaque first and then cut the miters. I used my Peacock pattern (Stack cut) 1/8" BBPW and used an 1/8" backer painted black and felt on the inside. Used picture frame hold downs to hold it all in place. Built the frame based on the dimensions of the combined doors. Added a 1/4" backer into the recess of the frame. Went 1/4" but should have gone a little wider. Not much room for the screws. 3M sprayed felt and applied to inside of backer. Bought hinges and hangers and french cleat from Woodcraft. Got very thin magnets from HD. Finish was several coats of black lacquer. Gold paint was from Hobby Lobby for the peacocks. I'll be sending it off this week and hope it get there before Christmas.

I am slower than molasses in January but I finally got it done. My photography skills aren't very good so I apologize for the glare. So I scrolled sawed my epoxy resin painting.... Here are my steps: I painted a galaxy pic on plywood, added a layer of epoxy resin (made a dam around the wood with tape), painted more stars for depth, another layer of epoxy, airbrushed and added the moon, and another layer of epoxy. Let that dry 2 weeks than scroll sawed my Daughter and her husband's wedding pic (silhouette) into the resin/picture (that was scary). Glued a backing of 1/4" BB on to it, sanded the epoxy, poured black diamond epoxy into the silhouette (unfortunatly the camera does not pick up the sparkles) let that tack up, added another clear layer of epoxy to the entire pic. Added my 3/4" 'tree frame' which are missing a few leaves here and there . I did carve some of the tree frame for fun after I scrollsaw cut it. Added one more layer of epoxy and done! I do want to thank all the folks who have helped me and encouraged me along the way. I did use @Dave Monk technique on "lifting the trees" out of the wood. I also looked at a lot of all of your great works (gallery and bragging rights) to get some of my ideas...Thank you!

Made using maple, alder and Peruvian walnut. Dovetails all done on my scroll saw.

My granddaughter ask me if I had a pattern for a Farm Combine. I could not find one. After she was gone for about a month I found one and purchased it. She wanted to give it to a neighbor who had been a big help to her and her husband on their farm, as a thank you gift. I have never enjoyed wooden toys much but I decided to try and make one anyway. It was a little complex to understand the patterns at first and I even glued one of them on backwards and had to cut it off and hopefully it could figure out how to do that without damaging the preexisting vehicle. I got lucky on it and was able to cut another piece and put it on without it being noticeable. the wheels and the front cutting roll and the yellow grain shoot pivots too, to give it some interest. It was a little difficult for me but I am glad it came out as well as it did. I plan on making one for a farm guy who gave me a ride in one as he cut his field when I was in Oregon a few months ago. Dick heppnerguy

I cut this 11X14 Alex Fox Pattern titled Eagle-Flag from 1/4 inch thick Oak solid core plywood, that I stained with Minwax Weathered Oak stain to enhance the Oak color. The cut panel was affixed it to a 1/4 inch thick Mahogany solid core plywood backer that I darkened with Minwax Mahogany stain to improve the contrast. The panel was finished with multiple coats of spray lacquer. The cut was done exclusively with Pegas #0 spiral blades. Cutting the Oak was slightly more challenging than the Maple or BB Plywood I usually use. Had to cut a little slower and even the cutting sound was different. After the cut was complete the vertical grain alignment produced an interesting look. The panel is loose fit into a solid Red Oak Frame which I made and also darkened with the Minwax Mahogany stain. The Frame was finished with multiple coats of clear Gloss Polyurethane.

My quarantine project was one of the featured projects in the winter 2020 issue of Scrollsaw Woodworking magazine! So proud and humbled! Thanks for all the support from the group.

If anyone is looking for a challenge, here it is! I think there was 2 million pilot holes, give or take a million, at least it felt like it was that many! It is a great pattern, but it is a tough one to cut. This was made for a friend to raffle off to raise money for the national wildlife turkey federation. I left the plastic on the frame for shipping.

Avast, Jim Hawkens! Be that Ben Gunn carrying Captain Flint's treasure Chest! (Treasure Island, 1950 the best!) Our Groomer has a 4year old grandson that is crazy about pirates. She had boarded our dog while we were away for Christmas and I was bored, so I made another treasure chest. The box is poplar and I used my I-Box tool to make the box joints. I ripped 3/4" wide, quarter inch thick strips for the top and glued and pinned nailed in place. Brass, hamered nails are sold a Lowes for a few dollars for a box of 25. My wife found the hardware on the web and did the fabulous paintings of the Scull and Cross bones and the parrot on the front and ship inside the top. The groomer will be back in about 2 weeks and will be surprised.

My latest Intarsia piece. Done for the PAM (project a month) in the Facebook group Just Intarisa. Kathy Wise donated the pattern. Woods used: Spanish Cedar, Rainbow poplar, Walnut, Cherry, Aspen Wenge. The eye highlight is a pencil crayon sharpened and pushed in the hole. Finish is 2 coats of Osmo Satin with a coat of Walrus Oil over top. 25 pieces.

This project was cut on a 16" x 10" x 5/8" piece of salvaged American Chestnut using patterns by Jacob Fowler and Sue Walters for the scrollsawing which I then modified during the carving process. It was stained with artist oil paints and finished with Minwax Polycrylic finish. The Chestnut seen in the background was not stained and this is the natural color of the wood. It was easy to see why Chestnut was so popular among the early American furniture craftsmen because of its workability and finishing qualities. Dick

Just completed two of each of these. Cut from 4mm Hoop Pine Ply with a 3mm MDF backer painted flat black. Blame it / 390 x 320mm Wine / 320 x 300mm Friends in Low Places, Garth Brooks Wine Me Up, Faron Young

I used my scroll saw to cut the drawer opening on the table and to cut the chess pieces. I used alder, nogal, maple, and aspen.

I decided to try bevel cutting the "fossil" pattern by Steve Good. Then I decided to take it up a notch. Instead of clear coating or staining I sprayed it with "stone" paint to give it more of a look of being excavated from rock.

When I saw a youtube video of someone who did a scroll saw tutorial on the tree of life....it convinced me to get into the hobby. So I bought a scroll saw and made this my first project. I decided to attach a photo as well for the background. Also added a white backing so the light would show through a bit. I put the finished tree of life on the window sill.

It has been awhile since I have done much scroll saw work. I needed to practice a bit before making the ornaments. The pattern was from the Scroll Saw magazine. I made some out of 1-1/4" Cherry, Maple and Walnut. I cut them with either the FD Polar #5 or The PS Woods Super Sharps #5. Both of them are skip tooth blades and work well in thicker wood. The Super Sharps are more expensive but cut easier. They were finished with eagle can lacquer. I thought they were a bit plain so cut some 5/8" tall reindeer, stars or Christmas Trees. The small reindeer were cut from 1/8" Maple with a #3 FD Polar and a 3X magnifier lens. I made about 10 ornaments and gave most away to friends.

My wife's sister likes dragonflies so I cut this for her birthday. Wish I had Fiona's talent and could work without a pattern. This would have been a more enjoyable cut but apparently I didn't get enough adhesive on it and had to fight the pattern lifting. I added a bit of detail around the eyes to help them stand out a bit more. Red oak with Danish Oil and a stained glass backer.

Needed to take a break from doing framed, flat panel portrait work and make something different. I have had this Side and End wall bird battern for a very long time and have revisited it often. It did include the base pattern, but there were no patterns/details for the top or bottom. I had to design them on the fly. The box is nom 12” wide by 8” deep and 4” high. I really did not realize how large the box was until I began to assemble it. Since the box was quite large I decided it needed a divided drop-in tray. The box outer walls, base, top and bottom is solid red oak. The red painted wall backers, inside box bottom, inside base top and the inside box tray supports were made from 1/8” BB ply (cut from my cut-off scrap pile). The tray was made from 1/4" Red Oak solid core ply and has a depth of 1 1/4 inches. Because I did not realize the size of the box, I was forced to purchase a 6 foot length of Red Oak 1” by 12” (3/4” by 11 1/2“) to make the top and bottom. Big $$$$$. The available 2 foot long boards at Lowes were not quite long enough as I need 26 inches. So I now have a nice 3’-10” length left for another future project. I planed the bottom down to 1/2”. For the top I rabbeted the bottom perimeter 1/4"deep so the top has a lid keeper that projects into the box. I sanded a small round on each corner and I used a small ogee router bit to put a decorative edge all around the top and bottom. Everything was finished with many coats of clear gloss Lacquer after which I lined the tray and the lower box with red felt. A very sticky job as I was using contact cement. I'm contemplating installing some small hinges as the top is heavy and will be cumbersome to remove and replace during use. I’m attaching a few pics as it is hard to show all the detail in one. Feel free to critique my work. . Edit 7/3/21: It was requested I post pics with the hinges installed. I was able to mortice the hinges into the box and lid to get the lid to land flat on the box. The lid does not need a hold open device because of the lids overhang.

I am only a learner to sroll sawing. I got my new carbatec scroll saw yesterday. I am feeling proud of doing this as I have never done anything like this before. I had only been cutting out the outside of things with my ryobi (now in cupboard). I was scared to have a go at this and taking the blade in and out through the holes and learning about my new saw, wooo hoooo I did it. Still need to sand it as the owl is only sitting loose on the back board. Not sure if to paint the owl or not Susan

Finished another 4 hearts. Received the pattern last year for Christmas and cut two then. Had a request for another one. 4 layers of 1/8 bb ply, cut with #3 MG blade. Finish is Danish oil, (fruitwood colour) and tung oil.

I know I have not posted anything for a while but I have been scrolling. I cut this Star Wars pattern for my grandson who is Star Wars mad. I have always told him that he could have the paper pattern but I would never cut it for him, what a surprise he is going to get on Christmas Day. The pattern is by Janevski. There are 338 individual cuts and it took me about 19 hours to do. I cut it from 2.5mm Bamboo ply. Marg

Just got done with this one.

Alex Fox’s Wolves. 366 cuts. BB oiled, mounted on 1” Poplar stained with True Black. Alex says on his pattern page that this one is rated as intermediate level. I may not ever reach his advanced level. I found this one to be pretty challenging.