Leaderboard

Here are two lighthouses. Cut from cedar with a #5 ultra reverse blade. Thanks to @don in brooklin onfor help on the patterns. Apples also cut from the cedar. Birdhouses were cut from unknown wood, but probably spruce. It was a piece of post/rail material. Finish is one coat of Garnet Shellac.

I have seen this done on here before so I decided to give it a try. I am celebrating my daughter's birthday tomorrow and I needed a box to put her jewelry in. It really was a fun project to do. It is a Carole Rothman pattern. I used walnut for the box and Holly, Purple heart, Canary wood and Bloodwood for the ribbon.

Oh wow that is fabulous. Excellent work Marie. Marg

Four more Miniature Birdhouse Ornaments designed by the late Diana Thompson. I used Eastern Red Cedar for the birdhouses and Spectraply for the little birds. Cut on the Pegas Scroll Saw using Pegas #3 Super Skip blades for the little birder and Pegas #6 Super Skip blades for the birdhouses. After a light sanding with a Mac Mop, dipped in diluted Shellac, another light sanding, and a final dip. Comments welcome.

Bragging rights-not. This was supposed to be a shower gift for my niece. I stupidly glued the base to the rings before sanding. While tring to correct, made some gouges in the bottom. I am now the owner of a new, small bowl! Made with Poplar. Locer the grain in it. Finish is beeswax/mineral oil. Maybe we need to start a new category.....Not Bragging Rights

Flat blades, spirals blades are forbidden in my shop LOL

Currently working on inventory for the one "event" I do each year. Starting with puzzles, word art, and portraits before moving on to other things. Examples include …

Stylized Owls pattern by Sue Mey. I reduced the pattern to fit the wood. I used 1/2" Red Oak 4" x 12", so each is about 4" square. Cut on the Pegas Scroll Saw using Pegas #3 MGT Blades. After a light sanding with a Mac Mop, dipped in diluted Shellac, another light sanding, and one coat spray Lacquer Clear Satin. Comments welcome.

Well done!

Finished this butterfly one

Here is a Cardinal - I know it is a popular Intarsia subject - I made from a 39-piece pattern I adapted from an image of a SG piece. The Cardinal and Flowers is approximately 8 ½” x 8 ½”, surface mounted on a 9 ½” diameter solid wood plaque style backer. Wood used: Aspen, Bloodwood, Poplar, Wenge, Mahogany, Yellowheart, and Sycamore for the plaque backer. The eye is a dot of white paint. The assembly is protected by multiple coats of rattle can spray Clear Gloss Acrylic Finish. The following JFYI. I happen to be fortunate to find a couple of Poplar nom 1"x8"x8' boards at my local Lowes that had a lot of, the hard to find, dark green color heartwood. I purchased them and added them to my wood stock, so I did not need to enhance the leaf color with dye or paint. I attempted to add some sculpturing effect to the flowers and it resulted in some visable color variations after applying the finish that I had not planned on, but my Lady says looks good. She says they look like real Dogwood Flowers. The Bloodwood, like Padauk, makes very fine dust that sticks to and stains other wood, however, it is not quite as deep dark as Padauk and it has slightly more color variations that was needed for this piece. The photo makes the red look darker then is is in real life. Comments and critiques are always welcome. This will be my last new project post for about 8 weeks. Please check out my post in Coffee House. EDIT: Pattern posted in Pattern Exchange

Bayou Blue Heron pattern by Judy Gale Roberts and found in the current issue of SWWC. I used 1/2" Red Oak and backed with mat board. Cut in the Pegas Scroll Saw using Pegas #3 MGT blades. After sanding, dipped in diluted Shellac and after drying, one coat of spray Lacquer Clear Satin. Comments welcome.

Well I just finished cutting out 14 Birdhouses and birds with the new pen blanks that Denny told me about. Just have to give them a little sanding cut the perches, glue them on and a couple coats of varnish. I'll put them on again when there all done.

The oak was more from an old yard fence a friend gave me. The whole privacy fence is oak. I used 321 but had to sand the cross down because you couldn’t see it. I then used semigloss poly. My wife did the finish for me. The walnut was a piece of scrap a friend gave me. My wife drew the pattern for me and did the finish w poly. We’ve been working on a bunch of stuff for the store where we sell for consignment. Thanks for looking.

Finished cutting, now on to painting and staining. I'll put this on the back burner untill the weather warms up a bit more.