Delta 40-694

Delta's were my favorites for many years.I'd like to test drive this one and put it to the test!

Dust Collection  No      Blade feeding  Both top & Bottom     Country of Mfg   Taiwan

       My second saw so have limited experience with any others, I'm Happy with it so far.

Believe it is very close to a DeWalt 788

Dust Collection  No      Blade feeding  Both top & Bottom     Country of Mfg   Taiwan

 

Wish I could spell better.       My second saw so have limited experience with any others, I'm Happy with it so far.

 

Believe it is very close to a DeWalt 788

Updated.  Thanks!

Mine came with the light. They have a six year limited warranty and they are direct drive.

The upper arm lifter is a nice feature.

I really like mine and have used the warranty without any problems

Don R

Mine came with the light. They have a six year limited warranty and they are direct drive.

The upper arm lifter is a nice feature.

I really like mine and have used the warranty without any problems

Don R

Don, who did you buy yours from? How lond ago? 

Don, who did you buy yours from? How lond ago? 

Long story but in a nutshell, I bought the original which was a 40-690 from Amazon .com on sale with the light and stand for something like $300.I think about 3 years or so ago. I had a few problems with it and finally about a year or so ago they replaced it with a 40-694 because they couldn't supply a replacement motor for the original. This one came with very dry bearings but once I got that sorted, no other problems.

Don R

Mine came with the light. They have a six year limited warranty and they are direct drive.

The upper arm lifter is a nice feature.

I really like mine and have used the warranty without any problems

Don R

It doesn't look like the light is standard, but rather an addon accessory.  Updated.  Thanks!

I would take the survey but have not had the 40-694 to rate the durable catagory.

Without filling that in, I cannot complete the survey.

Otherwise I  will rate it here.

Affordable $$$$

Change Blades   5

Loud  4

Vibration  4

Happy  5

The warranty on mine is 5 years. 

I love the saw compared to what I was using.

BarryK

I would take the survey but have not had the 40-694 to rate the durable catagory.

Without filling that in, I cannot complete the survey.

Otherwise I  will rate it here.

Affordable $$$$

Change Blades   5

Loud  4

Vibration  4

Happy  5

Fill in what you can.  Anything is helpful.

Fill in what you can.  Anything is helpful.

You must fill in all catagories. You cannot omit any or you get a red lite reject. 

So I cannot Fill in what I can.  

I also have the Delta 40-694. Like Don R said, the bearings were dry when I received it and it caused lots of noise and vibration. I took it apart and greased all the bearings with synthetic grease and it purrs now. It is a close brother to the DW788. It has many interchangeable parts. The only differences I can see is the arm lift hold and the case is slightly a different shape.

I also have the Delta 40-694. Like Don R said, the bearings were dry when I received it and it caused lots of noise and vibration. I took it apart and greased all the bearings with synthetic grease and it purrs now. It is a close brother to the DW788. It has many interchangeable parts. The only differences I can see is the arm lift hold and the case is slightly a different shape.

Just so I don't have to look for them, where are the bearings? 

Thank you

LarryEA, There are bunches of them. The main ones are where the pivot arm from the motor concentric connects to the parallel linkage. There are bearings in every moving part, small needle bearings held in by a cage. A sleeve or bushing goes into them and the bolt goes through that. The bearing that connects the motor concentric to the pivot arm is a sealed bearing and doesn’t need to be greased. Also when taking it apart keep in mind that nut on the shaft is LEFT hand thread. I watched a series of videos on YouTube about maintaining a DW788 and all the information is true for the Delta as well. If you have trouble PM me and I’ll give you my phone number and maybe I can walk you through it. https://www.youtube.com/watch?v=i7EWpq3aQeU

The light that came with mine when out within a month after purchasing & the motor started acting up a few weeks ago. I have had this saw sense late last fall. Not even a year old. Upgraded to the Dewalt. Nice this was i had bought a 1 year replacement warranty from the store i bought the saw from. Took it back and was replaced at no charge. Now this is my back-up saw.

I bought mine a few months ago and now that I have a couple hundred hours use on it I feel I can safely give a review.  So far it has been a great saw.  It's very quiet, so much so that I often talk to my Wife on the speaker phone while scrolling and she said the fan sitting next to me makes more noise than the saw itself.  The vibration is minimal and definately much, much less than my old ryobi that would literally move the stand accross the floor.  Blade changes are simple and painless.  I can't really comment on durability since my saw is still relatively new, only time will tell on that front.  I hope I don't have the problem the previous poster had with the motor.  Mine didn't come with a light so no worries there.  Overall I think it's a great saw for the price, and hopefully will get me by for a few years.

I have the 40-690, basically the same except no lift arm holder and they improved the on /off switch so dust doesn't get in as easily as mine. I've had mine for 8 years and use it alot, starting to hear some bearing whines in it now so will probably be replacing those before to long. I love my saw but I wouldn't suggest it for compound cuts. Better to go up to an Excalibur of better if that's your thing

I have never seen or  used  this saw in person but look forward to at some point. Price wise to me it is entry to mid level.

Interesting about the dry bearing comments. Are they dry bearings or bushings?

My first reasonable saw was the Delta SS350 and after a bit of use it seemed a bit noisy so I took it apart and put white lithium grease on all of the pivot points and the connecting links( they don't have bearings) it has been smooth and quiet since.

It is an emergency backup saw now. 

Had this saw for a month now and it runs about 5 hours a day till the gets to hot in the garage.   Sure is nicer than the old P_20  delta had . so far it has cut everything I place in the blade. plexi glass,paper.2" oak   Think they have a very nice mid price range saw here.

home depot  ships saw free,and gives miltary discount so that makes it real nice.