Search the Community

I have made this bird feeder about 6 times now. Up till now I have used plywood and each has disintegrated in a matter of a year or so. I was looking to purchase a marine grade plywood for this latest one but could not find any locally and to order on-line, the price was too high. I decided to try a different approach. Western Red Cedar. Cedar fences seem to last for many years, so maybe thisbird feeder will last for a while. I obtained the plans for this feeder a number of years ago. This version uses a modified version of the original scrollwork pattern and I have deviated significantly from their plans for the roof construction. I own a 12” planer but not a jointer. The maximum width available is eight inches, and I needed pieces up to 14” wide, so I was forced to edge join pieces to cut the parts from. I planed the rough nominal ¾” stock down to ½” and used biscuits however the joints were not all tight. Used lots of glue and sawdust to fill the joints. I wanted to make better looking sloping roof joints. So, after lots of calculations and some testing I finally got the four triangular roof pieces cut to the right size but unfortunately, I still did not figure out correctly what the bevel cut angle should be, so the pieces meet to form a nice joint, but I had to use scraps to fill the joints from the back side. Fortunately this is hidden by the inside ceiling of the feeder box. The scroll saw cut side walls were easy cutting using a Pegs #5 MGT R blade. I did not try to sand the cedar to a smooth finish. Where needed I used 80 grit paper to sand with, leaving a somewhat rough finish. Also, I was going to keep the cedar natural and let it turn grey/silver over time. However, my lady wanted it to be white, so I stained it white and then applied a coat of Polyurethane. The stain is somewhat transparent, so the grain still shows a little and the “Clear” Poly actually turned the white stain a little yellow. I don’t think the birds will care. Squirrels love to get to the bird seed, so I have two deterrents. First the metal pole is electrified so when the squirrels try to climb the pole, they get a shock. They learn fast not to climb the pole, but they still can jump over to the feeder from a nearby Fig tree. I have added a row of pointy nails facing out to the bottom piece where they land when they jump. Hoping they get stuck by the nails and learn not to jump. Not sure if this will work. They are smart critters. Here is a couple of pics. Aa always, comments and critiques are welcome.