Search the Community
Showing results for tags 'flooring'.
Found 1 result
-
One of my neighbors threw out a large pile of 2x2 foot flooring samples. I took some home to try. The vinyl samples were horrible to cut. The problem was with the glued-on padding. The glue was soft and gooey and mixed in with sawdust, and smeared all over the edges. However, some laminated (plywood) hardwood samples were lightly glued onto a 1/4-inch hardboard backing. I cut this cross from one of the panels. The backing came off while I was cutting, and I used tape to keep it together. I wound up with two crosses: one plywood and one hardboard. You can see the seams where I glued the tongue and groove panels together. After gluing, I put the cross on a nonstick surface and put two five-pound weights on top to hold it together and flat. I used two Pegas #3 MGT blades to cut this. It cuts much as I would expect from baltic birch plywood. The photo is not very good. I had never photographed a cross before.
